Open Source Linux SCADA Software
Sort By:
SCADA Software for Linux
View 15 business solutionsBrowse free open source SCADA software and projects for Linux below. Use the toggles on the left to filter open source SCADA software by OS, license, language, programming language, and project status.
-
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
Find Hidden Risks in Windows Task SchedulerWindows Task Scheduler might be hiding critical failures. Download the free JAMS diagnostic tool to uncover problems before they impact production—get a color-coded risk report with clear remediation steps in minutes.
-
1
Yet Another BACnet Explorer
Graphical explorer for BACnet and Free BACnet library in C#
Graphical explorer program written in C#, for browsing BACnet devices (run on Windows & Linux). Supports BACnet MS/TP, Ethernet, IPv4, IPv6, SecureConnect Basic functions for read, write, read multiple, write multiple, iam, whois, subscribeCOV, notify, WriteFile, ReadFile etc. Includes three demo server applications : a generic server, a wall mounted room controller simulator, a weather server (gets data from an Internet webservice). Includes a lot of samples C# source code. Raspberry Pi server sample code, also tested on Beaglebone & Intel Edison. Bacnet/Mstp capture tool (only Wireshark and an Rs485 adaptor are required) BACnet/SC Hub sample application. See Readme.txt for more information. Active Developers/Contributors team : Morten Kvistgaard (2014-2016), Frédéric Chaxel (2015-2025), Lance Tollenaar (2022-2024) -
2
Ethernet/IP Explorer & C# Stack
Graphical explorer, browser for EtherNet/IP™ network
Ethernet/IP Explorer/Browser written in C#. Run on Windows & Linux with mono. ODVA CIP : Common Industrial Protocol. Shows devices on the local network. Displays the classes, instances, attributes. Decodes values using standard decoders and also ones defined by the user. Write attributes. Can send ForwardOpen for T->O and T->O data exchange, also with user defined decoder. Full open source code. Explicit & Implicit messaging basic client source codes. EtherNet/IP™ is a registered trademark of ODVA, Inc. -
3
QTester104
IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada -
4
ScadaBR
Open source SCADA
We are now on GitHub: https://github.com/ScadaBR/ScadaBR ScadaBR is a SCADA (Supervisory Control and Data Acquisition) system with applications in Process Control and Automation, being developed and distributed using the open source model. -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
IEC 104 Client Master Simulator tool
Simulate iec 104 client Master all ASDU monitor command file transfer
v21.06.018 Complete Simulation of IEC 104 Client as per Protocol Standard including File transfer (Both Monitoring and control direction). Add up to 50 Client node in the simulator. Every Client node will work independently. The user can monitor all data Point information, and quality bits. Send all type of commands, parameter activation, file transfer. * License Perpetual One-time payment, royalty-free Neither license manager nor dongle required Interoperability: http://www.freyrscada.com/docs/FreyrSCADA-IEC-60870-5-104-Client-Interoperability.pdf Download Evaluation Kit - IEC 60870-5-104 Development Bundle: In the Development Bundle, We included IEC 60870-5-104 Server & Client Simulator, Windows and Linux Software Development Kit. http://www.freyrscada.com/iec-60870-5-104.php video tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bx7TVjtZnqFB6tbZBhOlJP -
6
OSHMI - Open Substation HMI
SCADA HMI for substations, IoT and automation applications
Now with IEC61850 support! This project combines existing open source projects and tools to create a very capable, mobile and cloud-friendly HMI system that can rival proprietary software. This approach makes it possible to join forces of each project (Chromium, SVG/HTML5, PHP, Lua, SQLite, Inkscape, Lib61850, OpenDNP3, Nginx, Vega, PostgreSQL, Grafana,…) to achieve a great set of open, evergreen, modular and customizable tools for building great HMIs for automation projects. This is not a toy project! It's been actually used in dozens of substations up to 230kV level and also in control centers with configurations up to 70.000 tags. Feel free to ask questions in the "Discussion" section. Help sponsoring OSHMI here https://github.com/sponsors/riclolsen. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada -
7
WebVisu
Pure Browser based Visualisation for PLCs
Framework to enable PLC Visualisations (like Wago 750-841, Beck IPC, CoDeSys 2.3) displayed in a standalone Browser without Java applets. Including Browsers of iPad, iPhone, iPod, Android aso.. Based on HTML5 canvas and Javascript. -
8
IEC104 Device RTU Server Simulator TCP
Simulate Complete IEC 104 RTU Server Monitor Command File transfer
v21.06.018 Complete Simulation of IEC 104 Server RTU as per Protocol Standard including File transfer (Both Monitoring and control direction). Add up to 50 server node in the simulator. Every server node will work independently. Tested with all leading commercial test tools. Support all type of Typeid ASDU, APCI, APDU, Command activation and termination commands. support all Cause of transmission (COT), Parameter in control direction. Interoperability: http://www.freyrscada.com/docs/FreyrSCADA-IEC-60870-5-104-Server-Interoperability.pdf Download Evaluation Kit - IEC 60870-5-104 Development Bundle: In the Development Bundle, We included IEC 60870-5-104 Server & Client Simulator, Windows and Linux Software Development Kit. http://www.freyrscada.com/iec-60870-5-104.php Video tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bx7TVjtZnqFB6tbZBhOlJP -
9
SCL Manipulation and Configuration Tools, is a set of libraries and applications that allows to create and modify XML files witch use Substation Configutation Language based on IEC61850 part 6 standart.
-
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
10
openSCADA
openSCADA® is an open source SCADA system written in JAVA
openSCADA is an open source Supervisory Control And Data Acquisition System. It is platform independent and based on a modern system design that provides security and flexibility at the same time. openSCADA is flexible. It is not an out of the box solution, but a set of tools that can be combined in many different ways. It provides development libraries, interface applications, mass configuration tools, front-end and back-end applications. openSCADA is ready to rock. It is used 24/7 in several installations around this world. openSCADA is supported. So if you prefer a fully supported, out of the box instead of a “build it yourself” solution you can contact IBH SYSTEMS GmbH and let us do the job. If you like, you will still get the source code that was developed specially for you. openSCADA needs you. Writing source code, writing documentation, fixing bugs or providing fresh input. Anything is welcome. -
11
TANGO is a device oriented control system for Linux and Windows. It provides a framework in C++, Java and Python for implementing distributed control objects. TANGO has a full set of tools and hundreds of device servers.
-
12
Modbus Master/Slave industrial terminal
Remote industrial terminal indicator to the control of Modbus-RTU on A
Remote industrial terminal indicator to the control of Modbus-RTU on Atmega128. Publication of "MODBUS on a leash. Remote industrial indicator. - Radiolybitel, Minsk, 2009, № 7, p.46" (series of articles http://radioliga.com). Project for IAR. -
13
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
14
-
15
IEC60870-5 101 tools code library
IEC 101 Server and Client Simulator Source code Library, Win, Linux
v21,06.018 IEC101 RTU Server Simulator, IEC101 Client Master Simulator, Static and Dynamic Libraries, Source Code Library. Driver for Windows, POSIX Linux, ARM , PowerPC, QNX & more * Make your RTU, protocol converter, Gateway, HMI, Data concentrator compatible with iec 101. * Download Free Evaluation Kit - IEC 60870-5-101 Development Bundle. * In the Bundle included IEC 101 Server & Client Simulator, Windows and Linux SDK, C# projects, Doxygen , Raspberry Pi, BeagleBone Demo library. http://www.freyrscada.com/iec-60870-5-101.php http://www.freyrscada.com/iec-60870-5-101-Server-Simulator.php http://www.freyrscada.com/iec-60870-5-101-Client-Simulator.php http://freyrscada.com/iec-60870-5-101-Windows-Software-Development-Kit(SDK).php http://freyrscada.com/iec-60870-5-101-Linux-Software-Development-Kit(SDK).php video tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bsVPrJVW4nknHozdfcWE5u -
16
Accent Tool Suite
Accent interfaces and controls systems through goals and policies
Accent (Advanced Component Control Enhancing Network Technologies) is a comprehensive tool suite that interfaces a variety of communications systems and allows these systems to be controlled through goals (high-level user aims) and policies (lower-level system rules). Accent has been applied to the domains of: o Call Control: for telecommunications, particularly call control in Internet telephony o Home Care: for home automation and telecare, particularly for domestic appliances and devices to support home care o Sensor Networks: sensor networks, particularly managing wind farms However, the approach is generic and extensible for managing other kinds of systems. Accent is essentially software. As most of Accent in in Java, it needs at least a Java Runtime Environment but more likely a Java Software Development Kit. To interact with the real world, Accent needs relevant hardware such as a communications server (softswitch) or home automation equipment. -
17
j2mod
Enhanced Modbus library implemented in the Java programming language
This is a fork of the jamod Modbus library, taken at version 1.2.1, released under the Apache 2 license, as contained in the SVN repository for that project. The goal of the j2mod project is to produce a more fully functioning Modbus(tm) communication library based on the Java programming language. It is the intention that this be an actively developed project, accepting submissions from professional software engineers with experience in Modbus Master and Slave development. -
18
JQM Java Quine McCluskey
JQM - Java Quine McCluskey for minimization of Boolean functions.
Java Quine McCluskey (JQM) implements the Quine-McCluskey algorithm with Petrick’s Method for minimizing Boolean functions. Designed for both education and industrial application, it handles up to 16 variables and functions. Uniquely, JQM bridges the gap between theory and practice: it visualizes the solution process with generated Karnaugh Maps for students, while supporting PLC engineers by exporting results to Structured Text (ST) and Ladder Diagram (LD). The software includes a GUI for managing truth tables and supports diverse file formats for import and export. -
19
OpenAPC
An open process control and laser engraving software solution
An extensive and multi-platform visualisation, process control and HMI application that supports many different devices via an open plug-in interface. Beside a visual GUI editor a debugger is part of the package. -
20
amici
AMICI enables real-time execution of cyber-physical models (Simulink)
AMICI, the Assessment platform for Multiple Interdependent Critical Infrastructures, simplifies and boosts experimentation with cyber-physical systems. AMICI enables the real-time execution of physical process models developed in Matlab Simulink, in a way that they can interact with real cyber systems, e.g., ad-hoc software or even real malware. The simulated physical models may come from a wide range of domains, e.g., power generation, power transmission, railway transportation, chemical processes. AMICI includes two main software units that have been developed in C# (Windows) and have been ported on Unix-based systems with the help of the Mono platform. AMICI has been primarily tested in FreeBSD-based systems. AMICI is developed by the European Commission's Joint Research Centre (JRC) For further documentation and acknowledgements please refer to http://ipsc.jrc.ec.europa.eu/?id=819 -
21
Automation_Control_Center
DEPRECATED
Control-Center for Automation. Control your PLC's and I/O's through a Database or Web-Interface DEPRECATED, NEW LOCATION: https://github.com/rudin-io/s7connector -
22
CyberOPC Sample Client(Windows Forms) included with a CyberOPC Client Library. Based on the CyberOPC Specification (www.cyberopc.org)
-
23
G4LTL-ST
Generating PLC programs from formal specifications
G4LTL-ST is a standalone tool and a Java library for automatically generating industrial control software (supporting IEC-61131-3 Structure Text) from LTL or extended logic specifications. See Tutorial.txt inside the package for step-by-step instructions. For technical demails, see CAV'14 paper "G4LTL-ST: Automatic Generation of PLC Programs". The old version (G4LTL; under BSD license) is available under file\arxiv. -
24
-
25
QFlow is a dataflow framework written in Qt which allows interaction of QObjects in a dataflow graphs. Such a workflow can contain graphical modules(QWidgets) which would be displayed during the execution of graph and can interact with other QObjects. Framework consists of Designer and multiple plugins with modules.
