Search Results for "64 bit zorin"

... is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.

SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/

MatODE is a simple Matlab toolbox for interfacing to the Open Dynamics Engine rigid body physics simulator (ODE, by Russell Smith), created by the Delft Biorobotics Lab (Delft University of Technology, Delft, The Netherlands). The system to be simulated is defined in an XML file, while the joint positions and motor signals can be sensed and actuated from a Matlab script. Examples are provided. Starting at version 0.30, MatODE is only available for Windows and Linux 64-bit. For older 32-bit...