Search Results for "utf-8"

GCBASIC is an open-source BASIC compiler for 8 bit Microchip PIC, Atmel AVR legacy, AVRDx and LGT microcontrollers. See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers.

...The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. ...

HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.

XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 4 stereo output channels.

Este projeto visa controlar através da porta serial um dispositivo. compatível com hardware da Robotica Simples, porem pode ser modificado para qualquer outro produto serial. O Hardware atendido é a placa controladora de 8 reles.

The 'LPT Interface' application is great for students. With 'LPT Interface' pupils can write & read the parallel port's: Data Port (8 bit), Control Port (4 bit) and read Status Port (4 bits).

Mellow Panda is a collection of LINUX applications for control of radio receivers. It consists of a daemon and specialized clients (dedicated to each receiver model). There are example clients which Uniden Bearcat and Icom radios.

C compiler for 8-bit microcontrollers, currently targeting the PIC 16F series

...Go to the directory of the cloned project, use git-lfs to get the binaries and the robot 3D models: git lfs checkout 4. Build the source using CMake 5. Create directory: mkdir build 6. Go inside build, type: cmake .. 7. Type: make 8. Run: ./demo1 or ./demo2 ../model/puma/puma.csv ../model/puma/puma.csv --- Binaries and robot 3D models are stored with git-lfs (https://git-lfs.github.com).

The micro-Ants are small, cheap, 8-bit devices which may outperform current home automation systems, thanks to their "swarm intelligence". This project aims at developing a micro-Ant hardware and firmware. Join and develop with us this new technology!