Search Results for "controller"

OpenBot leverages smartphones as brains for low-cost robots. We have designed a small electric vehicle that costs about $50 and serves as a robot body. Our software stack for Android smartphones supports advanced robotics workloads such as person following and real-time autonomous navigation. Current robots are either expensive or make significant compromises on sensory richness, computational power, and communication capabilities. We propose to leverage smartphones to equip robots with...

...It saves you a lot of gear and wiring by replacing dedicated FPV equipment, telemetry radios, and ground stations with a single Android phone. What you need Just two Android devices running Andruav: One device stays on the vehicle as the companion computer — connected to your flight controller over USB, streaming FPV video from its camera, and relaying telemetry. The other device becomes your ground station — displaying live video, telemetry, map position, and flight controls. The two devices talk to each other over WiFi or 3G / 4G / 5G, giving you telemetry range limited only by your mobile network instead of your radio.

...Difference from prototype, RobBX has complete conception witch includes: a complete STL 3D-models with OpenSCAD sources; a special schemes and electronics connections; and powerfull Arduino firmware for ESP32 based on WiFi AP Server, connection to it from mobile device give a controller, programmable from IDE (on Blockly). Robb - is a low cost constructor, but it powerful for STEAM education.

Java based portable simulator to visualize and understand the Robot Localization, Path planning, Path Smoothing and PID controller concepts. It is very flexible and easy to use. It supports multiple platforms. The source code is available on Github where you can find latest development and up-to-date documentation. Source : https://github.com/habsoft/robosim Blog : https://robosimblog.wordpress.com Note : Use jre 1.7 to run it. 1.Histogram Filter 2.Histogram Filter with Sonar Range Finder (Experimental) 3.Kalman Filter 4.Particles Filter 5.Path Planning 6.Path Smoothing 7.PID Controller Path Planning Algorithms 1.BFS 2.DFS 3.A Star 4. ...

The goal of this project is to develop a hot wire foam cutter that relies on a simple embedded controller to provide real time functionality.

Open source, cross platform drivers and function library for the NovInt Falcon Haptic Controller. These drivers are not produced by Novint Technologies, Inc. and do not come with any warranty as to their correctness or usage.

seeetron-ssc is Java source code for controlling the SEEtronics mini-SSC servo controller board (see: http://www.seetron.com/ssc.htm). The board itself does not come with Java support, so this project provides that third-party support.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

General Purpose platform for developing robots based on AVR's where the main intellegence is controlled by a PC or similiar device. Developed in 'C' for the AVR and Java for the controller.

Welcome to Multimodal Unmanned Aerial Vehicle Controller (MMAR) This project intends to develop a multimodal interface which gives a human operator capability of controlling a QuadRotor UAV efficiently and more easily. During this project we use a simulated QuadRotor called AirRobot in a simulation environment for development of robots, USARSim. There are some aspects involved in this project including touch, pose tracking, gesture recognition, voice recognition, etc and we try to utilize capabilities of some devices available today such as Android Phones and Microsoft Kinect. ...