Search Results for "memory"

...For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email. The MOD and MP3 routines were taken from StellaPlayer and libMAD respectively. The software I2S delta-sigma 32x oversampling DAC was my own creation and sounds quite good if I do say so myself.

...The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ...

...A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

All design related files for a general purpose PCB, hosting a Microchip dsPIC33FJ256MC710 part. Includes gEDA schematic and layout files, BOM, etc... The card will include power regulation, SD memory card, in-circuit programming support, etc...