Search Results for "serial port plotter"

A web-based interface for CNC milling controller running Grbl, Smoothieware, or TinyG. It runs on a Raspberry Pi or a laptop computer that you have Node.js installed, connecting to the Arduino over a serial connection using a USB serial port, a Bluetooth serial module, or a Serial-to-WiFi module like XBee or USR-WIFI232-T.

A C# .NET app to download or capture data from several medical device interfaces such as Datex AS3 S/5 Anesthesia, Philips Intellivue, GE Dash, Mindray HL7, Spacelabs, Draeger Infinity, Draeger HL7 patient monitors, GE Engstrom, Draeger (MedibusX), Maquet (Servo-i, Servo-U & Flow-i), Puritan Bennett ventilators, Covidien BIS Vista cerebral monitor, Fresenius Agilia, Alaris Carefusion, BBraun Spacecom syringe and volumetric pumps, Roche Cobas ASTM ABG analyzers. Requires Visual Studio 2022,...

This software is used to extract operational data from the EPEVER Triron solar-PV controller, including its PV power output, battery voltage, load current, device temperatute, etc. Data collection is done in two halves: a client ("solatonclient") that talks to the controller via a serial port and RS-485 adapter, and a server ("solatonserver") that stores the information in files. The "solatonclient" sends information to the "solatonserver" over the network, and because it does not need to write to the file-system itself it can be run on a small computer such as a Raspberry Pi.

Java library to send and receive data via Serial COM-Ports. This library is intended to provide an easy way to access the serial-port. Only a few lines of code are needed to Read or Write data via serial port. All Properties and Methods are inspired by the "SerialPort"-Class of the .NET Framework (System.IO.Ports.SerialPort) The benefit of this project is, that it needs only a few lines of code to implement, and a reduced CPU load. ...

serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600 is...