Search Results for "parallel"

Throughput testing, latency testing, jitter measurement, packet loss measurement, TCP testing, UDP testing, ECN testing, L4S testing, responsiveness testing, bounceback testing, one-way delay measurement, histogram reporting, multicast testing, IPv6 support, parallel streams, bidirectional testing, full-duplex testing, congestion-control testing, socket pacing, CSV output, embedded systems support Current release: 2.2.2, August 31, 2026 About iperf 2 and iperf3: Read about the differences between these programs at https://iperf2.sourceforge.io/IperfCompare.html Man page: https://iperf2.sourceforge.io/iperf-manpage.html Manual: https://iperf2.sourceforge.io/iperf2-user-manual.html

...The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. ...