Search Results for "recommendation system php"

multiOTP is a PHP class, a powerful command line utility and a web interface developed by SysCo systèmes de communication sa in order to provide a completely free and easy operating system independent server side implementation for strong two factors authentication solution. multiOTP supports hardware and software tokens with different One-Time Password algorithms like OATH/HOTP, OATH/TOTP and mOTP (Mobile-OTP).

...Over 50 Exchanges / 40 Trading Pairs Supported (exchanges / pairings list at bottom of README.txt): https://tinyurl.com/ct-readme Nearly Unlimited Assets Supported (any on supported exchanges). Demo: https://dragonfrugal.org/open-crypto-tracker MINIMUM specs: 1 Ghz CPU / 512 Mb RAM / Quality 16 Gb MicroSD / Nginx or Apache headless / PHP v7.2+ Debian-based Auto-Install ("Terminal" app in your system menu, or over remote SSH): (RECOMMENDED WAY TO PRIVATELY / CHEAPLY USE APP ON INTERNAL / HOME NETWORK) wget --no-cache -O FOLIO-INSTALL.bash https://tinyurl.com/install-crypto-tracker chmod +x FOLIO-INSTALL.bash sudo ./FOLIO-INSTALL.bash

Tria O.S. detects hard & soft specs of the PC where you run it, you can load this info or specify it manually to let the program inform you what would be the best operating system for a specific PC, with the specified hardware, and then see the difference by adding RAM, a SSD hard drive, changing the graphics card ... etc. REQUIREMENTS: For Linux, you need GAMBAS 3.3 or later, so you will have to install the gambas3 package before installing. 90's EDITION needs 160 MB (192 MB on...

PLEASE NOTE: this project has been moved to https://piwebcam.github.io Instructionable: https://www.instructables.com/id/Fully-featured-Outdoor-Security-Camera-Bas

Heizungssteuerung für Fußbodenheizung auf dem Raspberry PI unter Linux mit Touchscreenbedienung und 1-Wire Sensoren. Nachfolger unter https://gitlab.com/notdefine/heating-control

This image has been created for those who wan to listen radio and music in the car without having a special car player. You will need only a smartphone with bluethooth , raspberry pi , bluethooth device reconised by raspberry pi and a min 8 gb card, and optionaly a gsm 3g modem. You connect to the device via bluethooth. It is Visible in the first 30 seconds after boot . Device IP on the bluethooth is 192.168.3.1 and lan is configured to get ip from any dhcp server.