Search Results for "dhcp-pools"

Pi PXE server for network booting Contains Raspbian Lite configured with: dhcp, tftp & nfs Based on http://github.com/beta-tester/Rpi-PXE-Server Run this image on one Pi. This provides PXE boot images to - PCs ( Ubuntu /Raspberry Pi Desktop x86) - Pi3s (Raspbian Lite) Set wifi in wpa_supplicant.conf for shared internet Downloads: Pi-PXE-serverUBuntuRpd.zip [5.2 GB] - PI server with Ubuntu / RPiDesktopx86 bootable ISos Pi-PXE-server.zip [4.0 GB] - Pi Server with RpiDeskopx86 ISO

Welcome to FreeNIX RPI LE (Raspberry Pi Light Edition) If you find bugs contact us on the forum https://www.freenixsecurity.net/forum/ or by email to freenixsecurity[at]riseup[dot]net Developer/s: davenull - dave-null[at]riseup[dot]net - https://www.freenixsecurity.net This is a Debian-Based (Debian Stretch) distro for Raspberry Pi. It's developed for Raspberry Pi 3 Model B and works on Raspberry Pi 2 Model B too. It starts without X Window System, just SSH. It starts in DHCP mode, you can find it with nmap or other software like this. It has Raspbian, Backports and Deb-Multimedia Repositories. Username: root Password: freenixsecurity

...Visit http://www.nuxii.fr to find our products v1.0.2 Long press detection added to lirc. .lircrrc file modified v1.0.1 IR, Leds and rotary encoder work out of the box. Added some webradios. Volumio-WebUI modified to include dtoverlay=lirc_rpi and remove Update button. Added avahi-autoip to assign link local address when no DHCP server available (allow direct control with a PC without local network). Updated openssl. Please note that pigpiod may conflict with clock peripheral. When i2s-DAC available( pigpiod uses PWM). Else, PCM is used Default pins: IR/LED Module IR Out: GPIO 17 | Pin 11 Report to IR Receiver Model Specs LED1 : GPIO 27 | Pin 13 LED2 : GPIO 22 | Pin 15 Rotary Encoder Module: PEC12 A : GPIO23 | Pin 16 PEC12 B : GPIO 24 | Pin 18 PEC12 1 : GPIO 25 | Pin 22 LED1 Always ON LED2 ON when PLAY Pins can be changed in /home/volumio/script.volumio.service/addons.py MicroSD cards need to be expanded

slimbian is slim and minimalist version of Official Raspbian targeted for full running of light server or embedded application in Raspberry Pi. Excluding many X11 library will make the installation become lite with smaller memory footprint in running. slimbian is not trimmed version of Raspbian, it's really a made of custom install of Raspbian minus GUI/X11 library. How to install into sdcard: $ tar -xzpvf 2015-10-slimbian-jessie.img.tar.gz $ sudo dd if=2015-10-slimbian-jessie.img...

Project homepage: http://haydenjames.io/download-arch-linux-raspberry-pi-wifi-access-point-setup/ Change log 03-22-2015 – Added Raspberry Pi 2 support. 07-20-2014 - Monitorix optimized. 07-17-2014 - Stripped down and optimized Arch Linux even more. 07-17-2014 – Extended partition. There’s now 700MB of free disk vs 90MB previously. 07-17-2014 - 138 Packages updated using pacman -Syu. 07-17-2014 – Now Model B+ compatible. 01-26-2014 – Config changes to address random network...

...You connect to the device via bluethooth. It is Visible in the first 30 seconds after boot . Device IP on the bluethooth is 192.168.3.1 and lan is configured to get ip from any dhcp server.