Search Results for "bus"

The open Home Automation Bus (openHAB) project aims to provide a universal integration platform for all things around home automation. It is a pure Java solution, fully based on OSGi. It is designed to be vendor-neutral as well as hardware/protocol-agnostic. openHAB brings together different bus systems, hardware devices, and interface protocols by dedicated bindings.

"KMI Comm. Bus Mediator" ("kmicommbusmediator") The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi 4 Model B" and "Raspberry Pi 5" to the "PPG Communication Bus" which is used by PPG devices such as the "Wave 2.2", "Wave 2.3", "EVU", "PRK", "Waveterm A", "Waveterm B". "kmicommbusmediator" contains hardware and software components: * "kmicommbusmediator-HW": "Comm.

"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. ...

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP,...

openMAS is an open source hardware platform based on DIN41612. Different boards can be used as controllers (Arduino, RaspberryPi, Nucleo, NI-Hardware). The modular construction converts your µ-controller board into an extensible measurement and automation system. For more information: openmas.de The english page is not ready, please use the german version. Have a lot of fun, openMAS-Team

This project was created to make i2c programming easier and platform independent. It is targeted toward the raspberry PI but it should work on any linux playform. By abstracting the use of an i2c bus behaind a TCP/IP socket, it becomes possible to create and test applications on any platform with a TCP/IP stack. Useage: 1. Install i2c-tools: apt-get install i2c-tools 2. Extract the binary: tar -zxvf i2cnet-1.0.0-rpi.tar.gz 3. Run the utility: ./i2cnet For usage information: ./i2cnet -h

Software to replace your analog cd changer in BMW cars. Prepared for Raspberry Pi, but can be run on any Linux platform with Mono installed.Makes use of I-Bus Gateway from OpenBM project.

Driver jar for Ksr10 Robotic arm connected on bus USB compatible with many OS including Raspberry Pi 1st Call with Ksr10.Ksr10Driver(Dest, Action, Dur, Light, debug) Dest = String: M1 or GRIPPER; M2 or WRIST; M3 or ELBOW; M4 or SHOULDER; M5 or BASE Action = String: OPEN or OUVRIR; CLOSE or FERMER; UP or HAUT; DOWN or BAS; LEFT or GAUCHE; RIGHT or DROITE DUR = double: duration in seconds Light = int: 0 Light off; 1 Light on Debug = String: optional = 'debug' if you want trace 2nd Call: Ksr10.Ksr10Driver(Dest, Light, debug) Dest = LIGHT if you want light on NL if you want light off STOP for stopping last call Light optional if Dest not STOP see above Debug optional see above