Search Results for "input"

Discontinuity Set Extractor (DSE) is programmed by Adrián Riquelme for testing part of his PdD studies. Its aim is to extract discontinuity sets from a rock mass. The input data is a 3D point cloud, which can be acquired by means of a 3D laser scanner (LiDAR or TLS), digital photogrammetry techniques (such as SfM) or synthetic data. It applies a proposed methodology to semi-automatically identify points members of an unorganised 3D point cloud that are arranged in 3D space by planes.

...It is a simplified version of Corvis [Jones et al.,Tsotsos et al.], designed for pedagogical purposes, and incorporates odometry (relative motion of the sensor platform), local mapping (pose relative to a reference frame of the oldest visible features), and global mapping (pose relative to a global frame, including loop-closure and global re-localization, this feature, present in Corvis, is not yet incorporated in XIVO). XIVO runs at 140FPS on stored data (here from a RealSense D435i sensor) or on live streams with a latency of around 1-7ms, depending on the hardware. It takes as input video frames from a calibrated camera and inertial measurements from an IMU and outputs a sparse point cloud with attribute features and 6 DOF pose of the camera. It performs auto-calibration of the relative pose between the camera and the IMU as well as the time-stamp alignment.

This software reconstructs 3D plant models in multiple views. Point cloud input is segmented, then patches of leaf surface are grown using the level set method. Please see the CPIB website for news of updates and further development.

### mesh reconstruction from point cloud # filters the input data eliminating noise # creates a quad shell - mesh with inside and thickness ### additional info: - GUI using Clan-Lib SDK