Search Results for "usb data"

This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.

...http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

The Software for Controlling Testing Equipment - has been designed to automate data acquisition and equipment control. Written in Perl, uses the SCPI language to communicate with instruments via RS-232 (serial) or USB ports.

This is a user space driver to log data from PICO ADC 11/12 for Linux. It has been tested on Linux 32 and 64 and on Mac OS X based on Fink project. You find more information about PICO ADC 11/12 here http://www.picotech.com/discontinued/USB-ADC-11.html. This little driver is based on libusb-0.1 (legacy API) which you can find here http://www.libusb.org.

The goal of this project is to develop an easily modifiable combination of VHDL firmware and LabView drivers for use with laboratory automation control and data acquisition using Terasic's DE2 board and the ISP1362 USB interface chip.