Search Results for "bascom-avr"

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases.

"µOS++" (micro OS plus plus) is an open source, royalty-free, real-time operating system intended for embedded systems built around ARM Cortex M or AVR devices. It is based on a preemptive scheduler written in C++ (more info in the Wiki).

This project is port of ecos 3.0 for AVR32UC3C target mainly for AVR32UC3C512C. In the compressed files four directories can be found: Avr32uc3c-ec – ecos project for AT32UC3C-EK board. ConfigTool – ecos configtool (works with Ubuntu). To compile ecos source codes Atmel tool chain for AVR32 devices is needed and can be downloaded from Atmel web site. Ecos-3.0 – ecos + AVR32UC3C port source files. Hellow_Examples – example project in Atmel studio 6.2 with, ADC test, LED and push buttons...

IBusBox is a open Source BMW/Rover/Mini I/K-bus real time network stack written in ANSI C targeting mainly 8 bit microcontrollers. It has been developed on the AVR ATA6613. You can use this stack for your own IBus extensions e.g. a mp3-Player.

ButterflyOS is a very simple operation system for the Atmel AVR Butterfly board. It's based on the AvrX multitasking scheduler, created by Larry Barello. A byte-code program for ButterflyOS, can be sent and managed through the serial interface.