Search Results for "avr-gcc"

ToaruOS is a "complete" operating system for x86-64 PCs and experimental support for ARMv8. While many independent, hobby, and research OSes aim to experiment with new designs, ToaruOS is intended as an educational resource, providing a representative microcosm of functionality found in major desktop operating systems. The OS includes a kernel, bootloader, dynamic shared object linker, C standard library, its own composited windowing system, a dynamic bytecode-compiled programming language,...

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me...

amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard.

Mark3 is a sophisticated RTOS and embedded systems toolkit, targeted towards a growing list of MCUs. Beyond providing "just another scheduler", it provides heaps, drivers, a shell, an event-driven GUI framework, and much more! It currently supports a variety of Atmel AVR, MSP430, and the ARM Cortex-M series of microcontrollers, with other platforms to follow. Mark3 was designed from the ground-up using disciplined object-oriented design principles - and unlike the vast majority of free...

The Femto OS is a very concise portable preemptive operating system for embedded devices with minimal ram and flash, up to say 16K flash, 1K ram. The main target is the AVR architecture, such as the ATtiny861/461/261 series.

PRTOS is an open-source preemptive real time operating system kernel for embedded applications. It presently supports the AVR and MSP430 architectures. The advantages of PRTOS are: It has the smallest footprint of any true preemptive system: 1.9kB for basic scheduling and task control, 5.1kB with all the features below (AVR '328 / gcc -Os); Only 950 lines of code implement all of the RTOS features (SLOC-L); The system is well documented with a comprehensive manual, well-commented...

Simplest of possible kernel for iterative time division multithreading on smallest AVR boards Arduino. This is a small and adapted part of the future "Like OS".

"µOS++" (micro OS plus plus) is an open source, royalty-free, real-time operating system intended for embedded systems built around ARM Cortex M or AVR devices. It is based on a preemptive scheduler written in C++ (more info in the Wiki).

aiorOS is an educational purpose Operating System project based on IA386. Its kernel provides support for: system calls, multitasking, paging (processes have 4GB space area). Runs binary programs as processes. Developed by Salvatore Iengo. Developer notes: - gcc version 4.0.2 - bochs 2.2.5 - Virtual box Suse10 development environment available for download

AvRtos is a small, preemtive, priority based real time operating system for Atmel AVR and ARM microcontrollers. It was written in C. AvRtos provides message queues and semaphores for task synchronization. It uses a static memory allocation scheme. AvRtos is nearly the smallest RTOS out there. Even pico]OS is much bigger. AvRtos can be compiled using gcc compiler. There is a AvrStudio 4 and Eclipse project file to get the example code working very quickly.

The ARM-Ada project provide ravenscar runtime system and some useful libraries for deeply embedded applications written in gcc ada (gnat) language. For now RTS port for lpc21xx is done.

luxur es un kernel creado en C una vez compilado con gcc se puede iniciar con grub o puede probar la .iso en una maquina virtual.

Simple OS for the 8-bit megaAVR family of AVR microcontrollers

pico]OS is a highly configurable and very fast real time operating system (RTOS). It targets a wide range of architectures, from very small 8 bit processors and microcontrollers up to very huge platforms. Ports are available for ARM, AVR, PPC, MSP430, 6502, MYCPU and for developing and testing purpose also for 8086, Win32 and Unix. pico]OS 1.0.4 was released 2012-07-12. This is a maintenance release that includes some bug fixes for the new ports for MSP430 and ARM Cortex-M. You may also...

Graphical OS Kernel compiled with gcc 4.6.1 and nasm 2.09.08

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device...

Its a tiny open source Operating System created mainly aid in study of Operating Systems. It's floppy based, uses FAT-12 filesystem with complete shell and basic commands. It created in C and assembly (gcc + nasm).

Free and simply RTOS for AVR at assembler. So far, the AVR Studio is used as a development environment. The system supports the preemptive and cooperative multitasking modes, semaphores. Use a small amount of memory for tasks.

FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.

SimpleAVROS is RTOS designed special for AVR microcontrollers. Supported Compiler - AVR Studio. Language - Assembly. This is RTOS consist of source code. Supported microcontrollers - ATmega48; In the future- ATmega88/168, ATmega164/324/644, AT90usb82/162

AVRCNC is a CNC-Controller based on an ATMega8 and some other (cheap) hardware. Main advantages compared to L297+L298 are: - simpler to build - easier to expand - mega8 controlls motors directly - no time-critical tasks on PC

Javum, the Java Virtual Unix Machine, is an ambitious project which aims to provide a full virtualized Unix environment including C compiler (GCC), Unix-like API, shell, and command line tools, inside of a JVM. Details @ http://javum.wiki.sourceforge.net

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

ButterflyOS is a very simple operation system for the Atmel AVR Butterfly board. It's based on the AvrX multitasking scheduler, created by Larry Barello. A byte-code program for ButterflyOS, can be sent and managed through the serial interface.

SDL REFLEX is the micro kernel of a real time operating system for the AVR microcontroller family. The kernel is especially designed to implement systems described in SDL – “The Specification and Description Language” . Compiler GNU ANSI-C for AVR v.3.3