Search Results for "usb device server"

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

This project reimplements from scratch the RPL language made popular by HP programmable calculators, in portable C/C++. The main goal is to release a complete computing environment for various targets. There's currently 4 active targets: the HP 50g, HP39gs and HP40gs calculators and a PC simulator (see the downloads section!). Other ports are planned for the future.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

HelenOS is a portable microkernel-based multiserver operating system written from scratch. It decomposes key operating system functionality such as file systems, networking, device drivers and graphical user interface into a collection of fine-grained user space components that interact with each other via message passing. A failure or crash of one component does not directly harm others. HelenOS is therefore flexible, modular, extensible, fault tolerant and easy to understand. HelenOS...

This project is an attempt to design an message passing microkernel-based Operating System for the ZX Spectrum +3e computer equipped with ZXMMC mass storage device. It was made mostly for PoC purpose.

...If it is loaded, this program will not be able to acquire the rtl2832 device, and won't run. Create the file /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf with the line blacklist dvb_usb_rtl28xxu in it. The project website is an html version of the man page, so you can find more complete information there.

The Gigaset 3070 isdn is the ancestor of a family of ISDN DECT base stations allowing the connection of a PC via USB or DECT. This project is building the Linux support (drivers and frontend utilities) which Siemens neglected to provide.

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

Jari OS is a real-time microkernel operating system which runs in terms of multi-service architecture. Core system consists of its own microkernel μString, core and system services, set of device drivers launched as trusted services.

This project contains test software and tutorials for Analog Devices' Blackfin DSP device drivers and system services. See the wiki (in the menu bar above) for more info.

Linux device driver and userspace tools to support configuration and internet access with the ISDN-PBX brands "Deutsche Telekom Eumex x04", "DeTeWe OpenCom 20-40", "DeTeWe TA33 USB" and "EuraCom 140 USB"

Device Driver for the ACS USB servo controller (USBB-01 interface card). HID class USB device to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink outputs.

BSD SAM-BA is a free tool under ISC licence. Like the xp SAM Boot Assistant (SAM-BA.exe) this software provides a means of easily programming different AT91 devices. Communicating with the target device may be done through an RS232 or a USB link.

beetleOS is a small and flexible real time OS for embedded systems with preemptive multitasking. It also provides a lightweight device-driver framework. It is basically programmed for the ARM7 processor architecture but it could be ported to other archit