Search Results for "serial port plotter"

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

FiwixOS 3 is a Fiwix distribution, an operating system made from a software collection that is based upon the Fiwix kernel. It basically comprises a Fiwix kernel, GNU tools, libraries and additional software. All the included software is free and open-source software made available both as compiled binaries and in source code form, which allows modifications to the original software. FiwixOS 3 uses the Newlib v3.1.0 as its C standard library, and the Ext2 as its primary file...

...The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO board. ...

This project contains the USB to Combo Serial & Printer port Linux kernel driver for cables using the Moschip MCS7715 chip. It is packaged in a stand-alone form that can be used with older 2.4 and newer 2.6 kernel versions.

Network to serial port data relaying linux kernel module. Used for duplication of network ingress data, to serial port (TTY S) driver egress buffer.Serial line choice could be configured via sysctl and via proc fs (/proc/sys/net/core/zercopy_serial).

The project works on a kernel module and inetd service to allow the usage of a distant RS.232 port through a network connection.

Micro-80 aims to simulate a Z80 homebrew computer down to the bare metal: 64K RAM, ADM-3A terminal, parallel port, serial port and...3.5" 1.44MB floppy drive?!