Search Results for "modbus opc server"

Max IEC Gateway connects Modbus devices to SCADA systems. It reads meters, inverters, PLCs and drives over Modbus TCP, Modbus RTU (RS-485/RS-232) or RTU over TCP, and serves the data as an IEC 60870-5-104 or IEC 60870-5-101 controlled station (slave). Map registers to IEC points in a web dashboard: single and double points (also from register bits), measured values, step positions, bitstrings and energy counters, with any byte order, scaling, deadbands and time tags. SCADA commands are...

ModbusBB is a Windows Modbus master/client, slave/server simulator and command-line tool for SCADA and automation engineers testing PLCs, meters, inverters, drives and gateways. Connect to multiple devices over TCP, RTU, ASCII, RTU-over-TCP or UDP. Read/write coils and registers, inspect raw TX/RX frames, decode 16/32/64-bit values and strings with selectable byte order, scaling and units, and use FC08/17/22/23/43 device tools.

IT'S HERE-----FINALLY. AWA-Core 2026 is here with a totally new architecture. The core is now in Client/Server architecture and open to other applications (including yours). New interfaces for the server and client sides. Please, go to our youTube channel to see many tutorials about this new release. Don't waste your time trying things and clicking everywhere. Wait for our tutorials, install AWA-Core on a single PC or in a complete C/S architecture (Servers provided) and run...