Search Results for "library stack"

Node.js client for Elasticsearch. The client versioning follows the Elastic Stack versioning, this means that major, minor, and patch releases are done following a precise schedule that often does not coincide with the Node.js release times. Language clients are forward compatible; meaning that clients support communicating with greater or equal minor versions of Elasticsearch. Elasticsearch language clients are only backwards compatible with default distributions and without guarantees...

IpWay/HOST is a real time tcp/ip stack library designed for embedded applications on 32bit microcontrollers ARM and PPC based (STM32Fx, SPC56x, SPC57x, SPC58x), where execution efficiency and compact code are important requirements. IpWay/HOST is characterized by high portability, compact size, copyless feature (also for TCP applications) and Checksum offload. Moreover, IpWay offers a 100% compatibility with AUTOSAR MCAL versions 4.13 and 4.2.x.

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

openPOWERLINK is an Open Source Industrial Ethernet stack for communication in hard real-time. It can be operated as both, Managing Node (master) and Controlled Node (slave). With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. ...

Reliable group communication based on IP multicast and configurable protocol stack

openCONFIGURATOR is an open-source configuration framework for easy setup, configuration and maintenance of any POWERLINK (https://goo.gl/U9tjiy) network. It ideally complements openPOWERLINK, the open source POWERLINK protocol stack for master and slave. The project consists of a core library implementing the configuration algorithms and an eclipse plugin base user interface. For XDD tooling and validation support within eclipse please visit: https://goo.gl/NBytgg Please use the update site to install the plugin in your eclipse environment: http://sourceforge.net/projects/eclipse-plugin.openconf.p/files/update-site/ KNOWN ISSUE WITH THE UPDATE SITE DUE TO SOURCEFORGE ENCRYPTION POLICIES: https://goo.gl/kVr2ZZ Install via Eclipse marketplace: http://goo.gl/vweJ9h User Manual: https://goo.gl/viGd5P For Linux distributions with Boost 1.54.0 please use: https://goo.gl/hMRTss For Linux distributions with Boost 1.61.0 please use: https://goo.gl/ZSvW7C

Hostmon is a latency monitoring web app designed for ISP Support Technicians. Hostmon enables the Support Technician to provide a more rounded and detailed oriented service to his/her customers. Hostmon gives the Technician the ability to constantly monitor the network latency to hundreds of customer devices simultaneously. The Technician now has available, not only up to the minute network latency graphs for each device, but they can also view the historic latency information for monitored...

CANopen is the internationally standardized (EN 50325-4) CAN-based higher-layer protocol for embedded control system, and the CANopenNode is simple and reliable open source software stack used industrial and home automation for serial communication of multiple devices over the CAN/CANopen Network. This support package from Analog Devices, Inc. enables interfacing the required CAN drivers and code to perform CANopen slave operation on Analog Devices Inc ADSP-CM408 mixed signal controller...

cIPS is a robust TCP/IP stack for embedded devices.The cIPS library runs without an Operating System and is entirely abstract from any platform. However, it has been fully tested on the Xilinx Spartan 3E Starter Kit.

nwGTPv2 is free and open source implementation of GPRS Tunneling Protocol version 2 (GTPv2) or Evolved GTP (eGTP). GTPv2 is primarily used for control signalling between Serving Gateway SGW and PDN Gateway (PGW) in Evolved Packet Core (EPC).

nwWimaxAsnCp library is implementation of WiMAX ASN Control Protocol stack as per WiMAX forum specification release 1.0. WiMAX Base Stations and ASN Gateways make use the protocol for control plane signaling on R4, R6 and R8 interfaces.

jnetstack - The Java Network Stack , provides a Java API to research-oriented network programming.

Nanov6 is a minature IPv6 stack for the Microchip PIC16 family of microcontrollers. Its modular design and simple API is designed for easy modification and itegration into a wide variety of next-generation network enabled embedded applications.

Object-oriented IP stack. Written in effective C++. Based on STL and Boost libraries. This stack is stand-alone (OS-independent), portable and includes a comprehensive set of standard protocols : IPv4/6, ARP, ICMP, UDP and TCP implemented according RFC

Minshara Java Bluetooth Stack is a Java (JSR-82 compliant) Bluetooth stack. It's based on javabluetooth and features RFCOMM and OBEX protocols, and also security. It's exhaustively documented and provides a bunch of samples -orson.rasip.fer.hr/~tsecen.

FreeSNMP is a free Java SNMP development platform. Imediate objectives will be the implementation of a full SNMP protocol stack, a Manager API and an Agent API. Future objectives include the development of several managing tools, and an Agent simulator.

Ale4NET used dyn library call diversion to define networking at process level. This project has been dismissed. Now it is part of View-OS project: http://savannah.nongnu.org/projects/view-os. LWIPv6 user-mode IP stack latest releases are in View-OS, too

Liquorice is a multithreaded SASOS for use in embedded systems (8 bit and up). Includes a small but working IP/ARP/ICMP/UDP/TCP stack with SLIP, PPP and Ethernet support.

This project is a Widcomm Bluetooth stack opensource wrapper to allow developers to write applications using Microsoft .net framwork. New homepage: http://widcommwrapper.codeplex.com/

Modular EtherCAT master stack targeting real-time industrial control. Configurable anywhere from a lean-and-mean basic stack to a full-fledged EtherCAT master.