Search Results for "serial"

...However, I decided that it would be easier and more sustainable to define one flexible Ground Station Software that lets developers define how each CanSat presents data using an extensible communication protocol for easy data visualization. Developers can also use Serial Studio for almost any data acquisition and visualization project outside of CanSat, now supporting data retrieval from hardware serial ports, software serial ports, MQTT, and network sockets (TCP/UDP). You can download and install Serial Studio for your preferred platform.

A versatile test tool running on Windows/Linux/macOS/Android. Works as data transceiver/realtime plotter/shortcut/file transceiver. Supports serial port, Bluetooth SPP client/server, Bluetooth LE client, TCP client/server, UDP. Homepage: https://github.com/wh201906/SerialTest

The cross-platform VT100 terminal emulator for serial ports and TCP / UDP connections has a simple, uncluttered interface that can be extended with JavaScript.

Electronical interlocking system for modular model railroad layouts.

ScriptCommunicator (scriptable data terminal) script which routes: - serial port (RS232, USB to serial) <-> TCP/IP (Client/Server) - serial port (RS232, USB to serial) <-> UDP/IP - TCP/IP (Client/Server) <-> UDP/IP ScriptCommunicator can be found here: https://sourceforge.net/projects/scriptcommunicator/

INFORMATION This program can be used for the following: - To collecting Cisco device information like: hostname, serial, model, IOS image, version, uptime, free memory (to CSV) - To enable the SCP service on the device (automaticly before file transfers) - To make a backup of the running-config and startup-config with SCP (with built-in MD5 hash comparison check) no TFTP/SFTP server needed. - To save the running-config to the startup-config (write memory) - To transfer a new image to the device with SCP (with built-in MD5 hash comparison check) - To change the boot target to the new image (boot system flash:/) It has got the following features: - Error handling - information and error logging to log file (Log will be appended) - information and error logging to CSV file (Log will be overwritten each run) - Transfers retry 3 times - MD5 checks after file transfers to be sure the file is transferred without problems

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. It was originally developed as an open-source alternative to i2c and 1-Wire but during development, its scope and features have been extended to cover use cases where IP is generally applied. ...

Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners! Version 3 is in development. It is stable to use, but it is very different. It is command-line based, which allows it to offer not just more features, but make them more customizable. This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is...

CLI based, recursive mapping/discovery of network devices via SNMP(CDP/OSPF/BGP MIBs). SNMP(LLDP MIBs), telnet, and SSH are to follow, along with multi-vendor support (right now only supports cisco devices). Requires Perl and Net::SNMP, Net::SSH, and Net::Telnet modules.

cyclades-serial-client is an RFC 2217 compliant client that works with servers such as Cyclades Terminal Servers and sercd. It creates a virtual serial port which connects to the server over a network.

This Linux script helps people learn how to program routers. It has a GUI and a terminal that can be used simultaneously. GUI command output appears on the terminal, along with the results. The terminal is always available and interactive.

A C++ multiplatform system library to ease the use of SSL sockets (TLS, DTLS), Serial ports (COM) and memory management (smart buffers, XML parsing)

XSockets - open, lightweight and highly portable library of universal and eXtensible Super Sockets for point-to-point communication. A unified API for many communication methods between programs and/or devices (e.g. TCP/IP sockets,serial link,pipes,IrDA)

This program builds up a Modem server, which supports Hiroyoshi Kurohara's NPCOMM-Suite.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

Development area for GNU/Linux 2.6.x for the KS8695 ARM SoC. Covers kernel patches, drivers for serial, Ethernet, PCI, GPIO, watchdog subsystems, and drivers for optional PCI based devices such as USB, WiFi, WiMAX, IPSec, SSL, and RSA devices.

Network to serial port data relaying linux kernel module. Used for duplication of network ingress data, to serial port (TTY S) driver egress buffer.Serial line choice could be configured via sysctl and via proc fs (/proc/sys/net/core/zercopy_serial).

The project works on a kernel module and inetd service to allow the usage of a distant RS.232 port through a network connection.

Perl scripts for using the M232 A/D and I/O Serial Adapter from ELV (TM). Sample Applications for Console / Web. Temperature measuring, switching Devices, getting state of a smoke detector and so on.

Live Security/Forensics Linux Distribution, built from scratch and packed full of tools useful for vulnerability analysis, penetration tests, and forensic analysis.

DirecTV Web Remote is a web based remote control for DirecTV DSS receivers utilizing \'Low Speed Data\' port on back of the DSS and serial port on computer. Currently it supports only RCA 4th generation+ receivers, support for other receivers is planned

perl-LCDd handles communication with an LCDproc v0.4 server. With this Perl library you avoid using raw sockets and the native LCDproc protocol.