Search Results for "state-thread" - Page 2

MultiThreaded TFTP Server Open Source Freeware Windows/Unix for PXEBOOT, firmware load, support tsize, blksize, timeout Server Port Ranges, Block Number Rollover for Large Files. Runs as Service/daemon. Single Port version also available. Download

...It can be extended to support many types of packet-based traffic analysis by creating plug-ins and loading them in the main application. It includes many optimizations to ensure high performance traffic processing. Some of them are: multithreaded traffic processing; explicit thread pinning; configurable packet burst processing; support for PF_PACKET and PF_RING. It can be also used to inject the processed traffic to a TAP device or regular physical Ethernet interface. Its basic functuonalities make it a viable solution for preprocessing CISCO ERSPAN and HP ERM traffic which can be handed to some other application. ...

openPOWERLINK is an Open Source Industrial Ethernet stack for communication in hard real-time. It can be operated as both, Managing Node (master) and Controlled Node (slave). With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. A full documentation...

...Setup redirect from one path to another. Calling page.redirect with only a string as the first parameter redirects to another route. Waits for the current route to push state and after replaces it with the new one leaving the browser history clean. If you're doing selective binding you'll like want to pass { click: false } to specify this yourself. Exit routes are called when a page changes, using the context from the previous change. Create a new page instance with the given options. Use this if you need to control multiple windows (like iframes or popups) in addition to the main window. ...

This is a flexible radius client. The main idea is to have a client which could be easily used to test different Radius servers. Client supports: - Radius PAP authentication - Multi thread (sniffing separated from sending) - Several Attribute Value Pairs (AVP) supported (nas-ip-address, service-type, nas-port-type, calling-station-id, called-station-id) - We can add new AVP easily - Flooding mode (performance/stress testing) - Accounting messages Client uses scapy library to send/receive packets. It consists of two python classes: - RadiusExt: Radius class supporting AVP, authentication, packet manipulation (derived from Scapy Packet class) - RadiusAttr: Class for AVP (derived from Scapy Packet class) I use this client to: - test basic PAP authentication - send different AVP to test if Radius server is behaving correctly (RFC compliance) - display returned AVP - flood Radius server with multiple packets (performance testing) For examples please refer to readme.txt

pfck is a perl script that reads the state table of pf and reports back flows based on a supplied port number. pfck is very handy in ddos attacks to identify who's hitting a host or network on a particular port service, and who they are specifically hitting.

NodeBrain is a rule engine for construction of state and event monitoring applications. It interacts with other monitoring components to perform simple element state monitoring or complex event correlation based on user specified rules. It is extended through the development of node modules (plug-ins) using NodeBrain's C API, and servants (programs written in any language) that interact with the rule engine via stdin, stdout, and stderr.

...Rewrite the network model and the threading model. Optimize the locking mechanism, performance improved immensely. When Atlas start, it will create multiple threads. One of them is the main thread, the others are working threads. The main thread is responsible for monitoring the connecting requests from clients, and the working thread only monitor the command request from the main thread.

Passive network application response time monitor utilising libpcap packet capture. Maintains session state tracking host response, network round-trip times and end-point/network congestion. Can be configured for many protocols such as http, telnet...

...We have introduced link and path available bandwidth estimation mechanisms and an adaptive scheme that can provide feedback to the source node about the current network state, to allow the application to appropriately adjust the transmission rate. In the same way, we propose a route recovery approach into the AQA-AODV protocol, which provides a mechanism to detect the link failures in a route and re-establish the connections taking into account the conditions of QoS that have been established during the previous route discovery phase.

Surealived is a effective LVS service tester. It is based on epoll and allows you to detect your hosts state using HTTP, TCP, DNS, exec and a universal LUA embedded tester. SSL is also supported. Testers are easily extendable dynamic modules.

Step-by-step instructions for making your HVAC (Heating, Ventilation & Air Conditioning) system state-of-art. Covers airflow balancing, temperature control & zoning, energy conservation measures, remote access, 1-wire, XBee devices, home automation

...It is suitable for applications that require manual control of vehicles, telemetry and a secure two way datalink. It supports 256bit AES encryption. The FireLink API transparently provides state information (such as heading, ground speed ect) as well as several built in commands (arm motor, switch autopilot mode, etc). Additional user defined commands can be easily implemented. The API is written in C++ and has no dependancies. It will run on any platform that supports C++ including Arduino.

The purpose of this program is to monitor the state of an ADSL or VDSL2 connection. It works with DSL routers using Broadcom chipsets, which have a fully functional telnet interface with access to the Broadcom CLI. It also supports some Thomson/Technicolor routers via their custom CLI, but some of the features of the program are not available for these models. All of the data is obtained from the CLI via telnet.

NetworkService is a Java network API that simplifies development of LAN-based applications. It allows programmer to build locatable, state-monitorable software modules and exchange data between them in a peer-to-peer fashion. These modules can be given 'meaningful' names (Tom, FileServer1, Printer2..etc) instead of static IP address. NetworkService's project also provides SawaTalk - a server-less chat application (bundled with the final version of NetworkService ).

FAIN SNAP provides an active network programming language and interpreter. It allows finite state machines to be operated over a number of network elements. Its main use is to program firewalls and raise alerts. It is a native Debian distribution.

This program map the given TCP ports to other ports according to .properties file slots (localHost:localPort - remoteHost:remotePort pairs).

IP Tables State implements the "state top" feature from IP Filter for IP Tables. "State top" displays the states held by your stateful firewall in a "top"-like manner, in real time. IPTState also has an option to print your state table once and NOTE: Development has moved to github: http://github.com/jaymzh/iptstate

"diptables" is short for "distributed iptables" and as the name implies, it is trying to provide a facility to manage a large "firewall system" in which many number of single firwall machines exist. In this state, it is a very simple C++ program to add

This is the project thread of my project, creating a monitor solution for BizTalk 2004 - BizTalk 2010. All based in MSSQL, PHP, JavaScript/Ajax and PowerShell.

Birdseye is an interface for Nagios. It provides a clear overview of problems with hosts and services. Detailed installation info can be found here: https://sourceforge.net/p/nagiosbirdseye/wiki/

Perl script to close a TCP connection under Linux, whatever its state is (half-open, established, waiting or closing state).

A AddOn to Nagios. An additional view to see the state of a whole business process, not only of the single components. It takes results of the single checks and builds up aggregated states for a whole application and also allows You to simulate outag

FWInit is a simple firewall initialization utility coded in Python with Python configuration scripts with access to useful functions for manipulating the iptables filters and keeping the same state between invocations.

Ereshkigal is an autossh tunnel monitor. It gives a user interface to monitor existing SSH tunnel that are managed with autossh.