Search Results for "energy"

...It reads meters, inverters, PLCs and drives over Modbus TCP, Modbus RTU (RS-485/RS-232) or RTU over TCP, and serves the data as an IEC 60870-5-104 or IEC 60870-5-101 controlled station (slave). Map registers to IEC points in a web dashboard: single and double points (also from register bits), measured values, step positions, bitstrings and energy counters, with any byte order, scaling, deadbands and time tags. SCADA commands are written back to Modbus with select-before-operate and a configurable select timeout. Every change applies live, without a restart. Includes 9 device templates, CSV import/export, a traffic monitor, trends, IP allow-list and password-protected dashboard. ...

ModbusBB is a Windows Modbus master/client, slave/server simulator and command-line tool for SCADA and automation engineers testing PLCs, meters, inverters, drives and gateways. Connect to multiple devices over TCP, RTU, ASCII, RTU-over-TCP or UDP. Read/write coils and registers, inspect raw TX/RX frames, decode 16/32/64-bit values and strings with selectable byte order, scaling and units, and use FC08/17/22/23/43 device tools. Simulate devices with value generators, exceptions and...