Search Results for "ATmega"
Sort By:
Showing 26 open source projects for "ATmega"
View related business solutions-
Earn up to 16% annual interest with Nexo.Generate interest, access liquidity without selling, and execute trades seamlessly. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
1
FlashForth is a standalone Forth system for the Microchip PIC 18, 24, 30, 33 and the Atmel Atmega series of microcontrollers. A Forth system with interpreter, compiler, assembler and multitasker is provided.
-
2
Firefly Framework
Firmware development framework for ATmega/AVR
Firefly Framework -- firmware development framework for ATmega/AVR. Supported microcontrollers: * 16/16A * 164PA/324PA/644PA/1284P * 640/1280/1281/2560/2561 * 48P/88P/168P/328P * 128/128L -
3
amforth: Interpreter on Microcontrollers
amforth is an extendible interpreter on microcontrollers
amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard. -
4
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
PU2CLR SI4735 Arduino Library
This document is aimed at the Arduino developers, radio experimenters
This library uses the I²C communication protocol and implements most of the functions offered by Si47XX (BROADCAST AM / FM / SW / LW RADIO RECEIVER) IC family from Silicon Labs. This library also has primitive functions that make it easier for you to implement commands that may not have been implemented yet. See setProperty, getProperty sendCommand, getCommandResponse and getStatusResponse functions and also How to customize PU2CLR Arduino Library. It is worth noting, however, that this... -
6
PJON
Experimental, arduino-compatible, multi-master, multi-media network
PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. ... -
7
Simple Dumping Monitor for Arduino
Simple in use library to display dumps and debug Arduino sketches.
Simple Dumping Monitor Library (DumpMon) for Arduino-compatible ATmega microcontroller based boards allow to display either memory, registers and timer dumps and also interrupt vectors table dump. Beginning since version 0.6 functions of simple symbolic debugger are added. Being compiled the library requires about 11 KBytes of program memory (15 KBytes for Arduino MEGA). Requirements to RAM memory don't exceed 1 KByte (277 Bytes for dumpmon.pde example, 377 Bytes for dumpmonDebug.pde). -
8
JetiExBus
Arduino C++ library to connect to Jeti Duplex receiver via EX Bus
Beta Version !!! Connect your Teensy 3.x, AtMega 32U4 or ESP32 to your Jeti Duplex Receiver Receive rc channel data and send telemetry sensor data. Refer to Jeti EX Bus documentation for wiring http://www.jetimodel.com/en/show-file/642/ Find this project also on github: https://github.com/Sepp62/JetiExBus -
9
RC Turbine ECU telemetry sensor library
Simple code to read display data from an ECU turbine controller
...Use the projects and libraries on Arduino IDE 1.6 or later. You will need these additional libraries: https://sourceforge.net/projects/jetiexsensorcpplib/ For ATMega 328: https://www.pjrc.com/teensy/td_libs_AltSoftSerial.html -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
Wi-Fi Ducky
Upload, save and run keystroke injection payloads with an ESP8266
...The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine. -
11
AntennaTuner
A remote symetric antenna tuner using switched relays.
...The original tuner used an semidigital remote controller and 24line cable between the tuner unit and remote controller. I decided me to build the tuner unit and replaced the controller part by an ATmega MCU on both sides and linked them with cheap network cable. The used protocol between the controllers are RS422 based and is frame based with checksum. The tuner relays are switched each sepperate and the I/O unit are an two MCP23017 as I2C-Bus expanders.The MCU is an ATmega88 in a small housing. I decided me to use I2C-Bus Expanders instead using an ATmega 1284p and direct I/O handling in the expanding capability of this concept. ... -
12
K3NG-Keyer for AVR-Studio 7
K3NG-Arduino Keyer ported to AVR-Studio 7
This version of K3NG Morse-Keyer based upon the native Arduino hardware and sketch for the Arduino IDE environment. The Keyers sketch is moved to Atmel-Studio 7 and got some little modifications that was required to fit's the code to an actual GNU-CC Compiler that's shipped with Atmel-Studio 7. The Sketch-Import function of Atmel-Studio7 does not help's to become a usable project. The used MCU is an Arduino unsuported variant of a plain and native ATMega1284P, that's have enought memory... -
13
arduinounipwmlib
Small library for Arduino nano (only) for software PWM control
This is a library for Arduino nano for use in RC model building. It allows allows control of 8 PWM channels for LED or servo operation. Please note, that is is compatible with Arduino Nano and Arduino IDE 1.0x only. -
14
microDispatch
Microcontroller Task Scheduler
Super lightweight task scheduler aimed at 8 bit AVR ATmega micro-controllers (perfect for Arduino), although it can easily be used on other hardware like Microchip PIC. It uses simple round-robin scheduling so no priority levels can be set. You choose the time interval by calling dispatchTick(), this is usually in a timer interrupt. Range for number of tasks: 0 to 255 tasks Range for delay: 0 to 65535 ticks Each task only uses 5 byte of RAM. -
15
AVR Modbus Serial RTU
Serial modbus RTU with 16DI 16 DO
The AVR Modbus RTU is a Serial modbus RTU which has 16 digital inputs and 16 digital outputs. It is based on the free-modbus project. The RTU uses the ATMEGA 128 microcontroller . The source code , the schematics and the hardware production files are available for free. This project was designed for my MSc graduation paper in 2010 @ the Technical Univercity of Sofia / Bulgaria -
16
Simple DDC/CI on AVR
Implementation of DDC/CI protocol on AVR for monitors
Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI. -
17
-
18
LScreamer-Wireless Downloader for Linux
This is a python utility to transfer Firmware to a ATMEGA processor
See the latest revision at https://bitbucket.org/dustin-robotics/lscreamer This program is a port of Screamer V2.0 produced on Sparkfun.com which is useful for wirelessly downloading code to an Arduino. More info can be found at my blog: Mecharobotics.wordpress.com -
19
FreeRTOS DC motor PID controller
DC motor PID controller in FreeRTOS
this is an implementation of a DC motor PID controller in FreeRTOS, using ATMEGA 1280 microcontroller, used in arduino mega 1280. -
20
Emulation of the legendary sound chip SID ( MOS6581 ) used in the C64 home computer. Written in C, running on Atmega microcontrollers from Atmel. The hardware from the emulator may be used together with an Arduino and be controlled by I2C.
-
21
This is a protocol stack written to interface with the TI line of calculators on the Atmega line of microcontrollers. Currently supports the TI82, TI83, TI84, and TI89.
-
22
Atmel AVR Assembler for all platforms. Compatible with Atmel's own assembler. Extra macro features, auto type conversion for macros, conditional assembly, creates .coff files for debugging, special 100% identical output compared to orig. Atmel Assem
-
23
This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.
-
24
-
25
