Search Results for "eeprom"
Sort By:
Showing 38 open source projects for "eeprom"
View related business solutions-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
1
8051 Arduino FLASH/EEPROM Libraries STC
EEPROM and FLASH Labraries for Arduino IDE with Ardui89
Add 8051 family FLASH and EEPROM using functions for Ardui89 : https://sourceforge.net/projects/stc89 FLASH89 library allows to write, update or read byte directly in STC89C51 and STC89C52 FLASH memory. Using like a EEPROM. Warning : Write directly in FLASH Memory. EEPROM89 library allows to write, update or read byte in internal EEPROM of STC89C53, STC89C54 or better STC12, 15 family, like Arduino AVR. -
2
OpenBLT
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates. -
3
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
4
DarkLight Cover/Calibrator
DIY project to build a cover, flat panel or combo flip-flat panel
The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to... -
Demo Series - Small Business Backup By VeeamWatch this on-demand demo series and learn how to protect your Microsoft 365 data with clear, simple, actionable steps that are easy to implement for businesses of all sizes.
-
5
pFFh
a self-contained development environment for embedded systems.
pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At... -
6
eCxx
A C++ library for AVR and NodeMCU
NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original... -
7
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 125,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
8
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
9
EEPROM_editor
EEPROM programmer for the SST39SF040 chip.
This is a single purpose programmer for a 4MB EEPROM chip which is intended to be used as a universal logic device in a state machine. This fills the gap between circuits that are too complex for discrete logic gates while also not being suitable for Arduino type control. FPGAs are suitable for these applications, but the learning curve is steep, the tools are complex and for small one off projects, not worth the effort. -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
10
Arduino HomeKit ESP8266
Native Apple HomeKit accessory implementation for the ESP8266 Arduino
This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries... -
11
freebsd_rpi4_msdos_partition
backup of a known working msdos-partition for the RPI4B
...- you can simply override this whole partition to your downloaded rpi4-release from : https://www.freebsd.org/where/ (called rpi3 there). if you encounter any problems with firmware/u-boot/eeprom-upgrades or releases or even have improvements: please report to : freebsd-arm@freebsd.org -
12
PICKitPlus - the database
PICKitplus database only. For Microchip PICs and EEPROMs
...This repository provides the database that contains the new programming protocol to support for Microchip PIC microcontrollers We publish the updated and managed Microchips PIC microcontroller and EEPROM database here. You can use with the original Microchip software but the original Microchip software will not program many of the newer classes of chips. These new classes of chips will be listed in the menus, but, they will be detectable. -
13
Easily program your arduino board with flash & EEPROM management support
-
14
MonoDAQ-U-X demo DEWESoft dxs
Hosts DEWESoft setup files for MonoDAQ-U-X demo kit
...There is a hardware demo kit available for the device that includes: - servo motor - thermocouple type T sensor - load cell All of them can be connected to the MonoDAQ-U-X device that is automatically configured to measure voltage, current, resistance or temperature and drive the servo with PWM output. The configuration is saved in a 1wire EEPROM included with each kit. To also configure DEWESoft data acquisition software (https://www.monodaq.com/data-acquisition-software/) displays and mathematics, the DEWESoft setup files (.dxs) are available and they are hosted and updated in this project. -
15
A Python script to automate creation of supporting EtherCAT files including SSI EEPROM, EtherCATInfo XML (ESI file), and certain related source and header files for the Beckhoff slave stack code. mesicat accepts a .mesi file (Meta ESI) containing a description of the EtherCAT CoE dictionary and other stack configuration information. Make commands in this file then trigger the creation of sane defaults, SII EEPROM, XML files, and so forth.
-
16
rawi2ctool
RAW I2C command line tool for debug, test and more
This is a Linux command line tool to do raw I2C accesses to a bus, IF SUPPORTED BY THE ADAPTER, to probe the bus, read or write some data, detect glitches, do a bench, program an EEPROM with the required blocksize, test the I2C bus driver, ... Raw I2C mode enables data frames that are not supported by SMBus and related tools (such as i2cget, i2cset, i2cdump) -
17
This is a small foot print, high performance, type safe device driver library, initially targeting Arduino Mega 2560 and MoteinoMega. The library is stand alone and only requires Avr GCC and avrlib. The design is based on the same ideas as were used for the Ddr-Z8E device driver library (see http://ddrz8e.sourceforge.net/). Heavy usage of hardcoded invariants, constant folding/propagation and inlining ensures both tight code and high performance. Type safe enums (C++11) provides an...
-
18
Design of a billboard panel based on Microchip’s microcontroller PIC16F877A, with the following features: 1) Animation: Scrolling messages in vertical and horizontal direction 2) Storage: In EEPROM up to 10 texts of up to 78 caracters. 3) Recording of messages: Via PC serial port. 4) Characters: Size 8x12. 5) RTC: Programmable calendar.
-
19
flAVR
A simulator for Atmel's 8/16-bit AVR microcontrollers
...The project aims to implement a cycle-accurate AVR CPU core simulator along with a range of peripherals, allowing firmware written for a variety of parts to be run on a host PC. In addition, flAVR provides enhanced interactive debugging functionality - featuring breakpoints, data watchpoints, execution tracebuffers, flash/RAM/EEPROM viewers, and run-time disassembler. flAVR also implements the GDB remote protocol, allowing it to interface with Eclipse and other IDEs supporting GDB. The simulator also supports kernel-aware co-simulation when running binaries linked with the Mark3 RTOS, providing it with virtual input and graphics devices. The project is designed to be highly-portable, and builds with minimal dependencies. ... -
20
mcs51linux
MCS-51 programmer for Linux
This is a very simple EEPROM programmer for MCS-51 chips like AT89C2051, AT89C1051, AT89C4051 for BlowIT programmer (http://www.dinceraydin.com/8051/index.html). Wrote on C and uses Linux Parport driver. In addition there are 2 scripts Perl: ihex2bin and bin2ihex to convert ROM image from or to Intel HEX format. -
21
Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.
-
22
ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.
-
23
This is an advanced keyer implementation for Atmel AVR controllers written in C. The supported keyer modes are Iambic A/B and Ultimatic. Commands are entered using a paddle or a straight key. The memory can be extended using an external eeprom.
-
24
A multi-platform GUI that allows you to inspect and modify the EEPROM of the FT232 line from FTDI. Also lets you send and receive data using all the bit bang modes.
-
25
µClimaControl
Home made clima control for short expenses. PIC18F4455 based hardware.
Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.
