Search Results for "uno"

This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each...

UnoLib is a Free Pascal library designed for the Arduino Uno platform and AVRPascal editor (http://akarwowski.pl/index.php?page=electronics&lang=en) or other editor using FPC 3.3.1 for AVR microcontrollers (e.g. FreePascal IDE, Lazarus). It is a translation of a subset of the standard Arduino libraries, adapted as needed for a Free Pascal environment. Moreover, support for fixed point numbers has been added.

..."Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

This project is a partial overhaul of the Arduino hardware library, i.e. the main source files that make the core library. The intent is to reduce the overhead introduced by the initial library and eliminate the numerous function calls whenever direct register access is possible.