Search Results for "spi"

...The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. ...

W25qxx, N25Qxx, and other SPI FLASH drivers for stm32 HAL.

NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original...

...It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers; and it can perform OTA updates. ESP8266 Arduino core works with SD cards, servos, SPI and I2C peripherals.

periph is a Go library that unifies hardware I/O on single-board computers and embedded Linux devices, exposing clean interfaces for GPIO, I²C, SPI, UART, PWM, and more. Its philosophy is “no daemon, no codegen”—you link a Go package and speak directly to the hardware via stable abstractions, keeping deployments simple and auditable. The project auto-detects host capabilities at runtime and selects the best driver backend, smoothing over kernel and board differences across Raspberry Pi, BeagleBone, and other platforms. ...

The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ... Example source code to talk with this hardware is provided.

...It provides a C language application programming interface (API) for deploying individual processor capabilities. Current modules support serial communication via UART, I2C and SPI, digital I/O (GPIO), analog-to-digital conversion (ADC), Timers and so on. ocapi aims at being independent of the development host platform. So it should work, no matter if you live in the Windows, Linux or Mac world. ocapi is used as the hardware abstraction layer for the MSP430 port of the Takatuka Java virtual machine (JVM). ...

This is a small foot print, high performance, type safe device driver library, initially targeting Arduino Mega 2560 and MoteinoMega. The library is stand alone and only requires Avr GCC and avrlib. The design is based on the same ideas as were used for the Ddr-Z8E device driver library (see http://ddrz8e.sourceforge.net/). Heavy usage of hardcoded invariants, constant folding/propagation and inlining ensures both tight code and high performance. Type safe enums (C++11) provides an...

BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library.