Search Results for "ns-2"
Sort By:
Showing 20 open source projects for "ns-2"
View related business solutions-
Application Monitoring That Won't Slow Your App DownFull APM with errors, performance, logs, and uptime monitoring. 99.999% uptime SLA on the platform itself.
-
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
1
AWS IoT Device SDK for Python
SDK for connecting to AWS IoT from a device using Python
...It is a complete rework, built to improve reliability, performance, and security. We invite your feedback! The SDK is built on top of a modified Paho MQTT Python client library. Developers can choose from two types of connections to connect to AWS IoT. For MQTT over TLS (port 8883 and port 443), a valid certificate and a private key are required for authentication. For MQTT over the WebSocket protocol (port 443), a valid AWS Identity and Access Management (IAM) access key ID and secret access key pair are required for authentication. -
2
Async.MQTT5
A C++17 MQTT client based on Boost.Asio
...Async.MQTT5 represents a comprehensive implementation of the MQTT 5.0 protocol standard, offering full support for publishing or receiving messages with QoS 0, 1, and 2. The MQTT protocol is widely utilised for communication in various real-world scenarios, primarily serving as a reliable communication protocol for data transfer to and from IoT devices. While the MQTT protocol itself is relatively straightforward, integrating it into an application can be complex, especially due to the challenging implementation of message retransmission after a disconnect/reconnect sequence. ... -
3
AWS IoT Device SDK for Java
Java SDK for connecting to AWS IoT from a device
...It is a complete rework, built to improve reliability, performance, and security. We invite your feedback! The SDK is built on top of the Paho MQTT Java client library. Developers can choose from two types of connections to connect to the AWS IoT service. -
4
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 315,606+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2026. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ... -
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
5
json-scada
A portable SCADA/IoT platform centered on the MongoDB database server.
Standard IT tools applied to SCADA/IoT (MongoDB, PostgreSQL/TimescaleDB,Node.js, C#, Golang, Grafana, etc.). MongoDB as the real-time core database, persistence layer, config store, SOE historian. Portability and interoperability over Linux, Windows, x86/64, ARM. Horizontal scalability, from a single computer to big clusters (MongoDB-sharding), Bare Metal, Docker containers, VM, cloud, or hybrid deployments. Unlimited tags, servers, and users. HTML5 Web interface. UTF-8/I18N. Protocols:... -
6
mySQM+ DIY SQM WEATHER STATION
ESP32 mySQM+ Sky-Meter/Weather Station with loads of features
...Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author(s). EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/ -
7
DEVS-Suite Simulator
Component, CA, and CCA models; superdense time, DB repo, testing, etc.
...Version: 7.0 [Jan `23], 6.1 [Apr. `21], 6 [Sep. `20] , 5 [Jul. `19], 4 [Mar. `18], 3 [Apr. `15], 2.1 [Feb. `09], 2 [`03] See CoSMoSim: https://acims.asu.edu/software/cosmos : hierarchical visual modeling, database model repository, families of models, statecharts, partial-code generation for XML/DEVS-Suite model -
8
OSHMI - Open Substation HMI
SCADA HMI for substations, IoT and automation applications
Now with IEC61850 support! This project combines existing open source projects and tools to create a very capable, mobile and cloud-friendly HMI system that can rival proprietary software. This approach makes it possible to join forces of each project (Chromium, SVG/HTML5, PHP, Lua, SQLite, Inkscape, Lib61850, OpenDNP3, Nginx, Vega, PostgreSQL, Grafana,…) to achieve a great set of open, evergreen, modular and customizable tools for building great HMIs for automation projects. This is not... -
9
megawake
Remotely turn on devices connected to your home network
...More details available in: https://en.wikipedia.org/wiki/Wake-on-LAN For this program to work you have to: 1-Connect to the same network as the device you want to wake. 2-Enable Wake on Lan (WoL) feature on the device you want to wake. 3-Make sure the device is turned off or in sleep state. System requirements for WoL: 1-Smart TV must be manufactured in 2012 or newer. 2-Windows PC must be Windows 95 or newer. 3-Wake on Lan supported BIOS (Firmware) -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
Johnny-Five
JavaScript Robotics and IoT programming framework
...The Johnny-Five Inventor's Kit, from Bocoup and SparkFun, is now available! It's designed for anyone who wants to get started with JavaScript-powered robotics. The J5IK includes a Tessel 2, and everything else you need to do 14 experiments! No programming or soldering experience is required. Microcontrollers and SoC platforms like to say "Hello World" with a simple blinking LED; the following demonstrates how to do this with the Johnny-Five framework. -
11
IoT Leaf
Software resources for the ESP32 based IoT Leaf microcontroller board
The IoT Leaf is a small ESP32-based device which can be used as highly flexible power supply, as embedded controller or as a combination of both: it consists of a board which can be cut into two pieces resulting in two different devices or which can be used as one. The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS module. Both together provide a powerful hardware which can be used in many different scenarios. ... -
12
pyrpl
PyRPL turns your Red Pitaya into a powerful analog feedback device.
The Red Pitaya is a commercial, affordable FPGA board with fast analog inputs and outputs. This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows... -
13
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
...The LEDs on the case & the mobile application indicate if there is a high/low temp alarm, hi/low humidity alarm, soil moisture alarm, or smoke alarm. A speaker (buzzer) is activated on the case if there is a smoke alarm. 2 other LEDs indicate if either the exhaust fan is on or if the humidifier is on. -
14
imgFlasher
Flash OS images to sdcards and usb drives
...imgFlasher is a portable software that doesn't require any installation. The process of flashing OS with imgFlasher is super simple and requires just 3 steps. (1) Choose img/zip file. (2) Choose drive to flash on. (3) Click on Flash. Recommended using for Raspberry Pi, Banana Pi, Odroid, BeagleBone, Nvidia Jetson, Tinkerboard, etc. -
15
DHT22-MQTT-Sensor-ESP8266 (NodeMCU)
Use DHT22 temperature / humidity sensor on NodeMCU (ESP8266) with MQTT
This is a Sketch for the arduino IDE to enable the usage of a DHT22 sensor connected to a NodeMCU (ESP8266) with MQTT. Also supported are 2 status LED's and a SPI diaplay. After start the sensor device, there will be a Wifi-AP for configuration purposes. After successfully configuration, the sensor is connected as a Wifi-client and send the temperature and humidity data via MQTT within the given intervall. During AP-mode and client-mode, there are some RESTful functions (HTTP-requests) available, for configuration and retrieving information. -
16
smartIDS
Lightweight intrusion detection for IoT and embedded devices.
The aim of the project is a lightweight intrusion detection library for embedded devices which supports MSP430 and ARM Cortex based devices. Features include DSP/SIMD support, IoT and embedded protocols, distributed operation, event and history management, tool supported configuration and visualization. There is a Java port that supports less features. -
17
AWS IoT Arduino Yún SDK
SDK for connecting to AWS IoT from an Arduino Yún
...By connecting the device to the AWS IoT, users can securely work with the message broker, rules and the Thing Shadow provided by AWS IoT and with other AWS services like AWS Lambda, Amazon Kinesis, Amazon S3, etc. The AWS-IoT-Arduino-Yún-SDK consists of two parts, which take use of the resources of the two chips on Arduino Yún, one for native Arduino IDE API access and the other for functionality and connections to the AWS IoT built on top of AWS IoT Device SDK for Python. The AWS-IoT-Arduino-Yún-SDK provides APIs to let users publish messages to AWS IoT and subscribe to MQTT topics to receive messages transmitted by other devices or coming from the broker. ... -
18
TAP — The Aqua Project
A passive planet awaits one terribly impending water scarcity.
Application's theme is "water supply", referring to water crises, which have historically plagued civilizations. The TAP app seeks to: i- help human beings in quickly obtaining water for their diverse needs; and ii- promote rational and conscious use of water resources. Essentially motivated by an imminent threat in the city where I live, São Paulo, the TAP software intends to connect people who need water to the parts able to quickly provide it, such as water tank... -
19
...The data logger is an electronic device that records earthquakes(Sensor network), Wind ,daylight ,power used/produced on the street lamp over time. Data will then be uploaded via a wireless radio MESH network(868 Mhz) to a database server for later analyze. The Prototype is developed on two microcontrollers(AVR and ARM Cortex-A8) with the low power and
-
20
moonbird embed
moonbird is a simple but powerful http server (beta) with lua 5.2, and
# moonbird is a simple but powerful http server (beta) with lua 5.2, and sqlite3 embed ## inspired on a old project based on: https://www.apache.org https://www.php.org https://www.nodejs.org https://github.com/slimphp/Slim/tree/2.x https://github.com/Philipp15b/php-i18n https://redbeanphp.com/index.php https://mustache.github.io/ https://thephpleague.com/pt-br/ ## libraries/info used in this demo: https://www.lua.org https://www.lua.org/extras/5.2/ http://www.sqlite.org https://github.com/APItools/router.lua http://dkolf.de/src/dkjson-lua.fsl/home https://github.com/lunarmodules/say https://github.com/Olivine-Labs/lustache https://github.com/Tieske/date https://developer.mozilla.org/en-US/docs/Web/HTTP/Status#information_responses ## why/motivation: a simple but powerfull webserver with lua (w/ router, i18n, template, logs, ...) and sqlite3 using a simple 'handler' interface to call lua, ring, javascript or php ## image splash created
- Previous
- You're on page 1
- Next
