Search Results for "led"

...It is based on a small-footprint kernel specially designed for use on resource-constrained and embedded systems. The Zephyr OS can be used for a wide range of applications: from simple embedded environmental sensors and LED wearables to sophisticated embedded controllers, smart watches, and IoT wireless applications.

Gobot makes controlling robots and devices incredibly simple and fun. This program connects to an Arduino, and toggles an LED, every one second. Support for devices that use Analog Input/Output (AIO) communication have a shared set of drivers provided using the "gobot/drivers/aio" package. Support for devices that use General Purpose Input/Output (GPIO) communication have a shared set of drivers provided using the "gobot/drivers/gpio" package. Gobot has a extensible system for connecting to hardware devices. ...

...Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful profiles. to combine inputs and outputs. It also supports MQTT including MQTTs as publisher and subscriber to make it possible to combine multiple devices and to create complete scenes with just one click (i.e. to switch on lights within the whole flat). ...

Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet.

...The J5IK includes a Tessel 2, and everything else you need to do 14 experiments! No programming or soldering experience is required. Microcontrollers and SoC platforms like to say "Hello World" with a simple blinking LED; the following demonstrates how to do this with the Johnny-Five framework.

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &...

The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other...