Search Results for "can="

Project was moved to https://github.com/canopennode ---- CANopenNode is an open source software stack used for serial communication of multiple devices over the CAN/CANopen Network. It works on different microcontrollers, is reliable, simple and powerful and is suitable for industrial or home automation. CANopen is the internationally standardized (EN 50325-4) (CiA DS-301) CAN-based higher-layer protocol for embedded control system.

INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc). Project migrated to Github: https://github.com/indilib/indi

A tool for graphical analysis of digital traces recorded by Agilent's Logic Analyzers like HP16700. It is possible to perform higher level bus protocol decoding and parsing with help of "search" tab. These tabs are used to select the Bus Decoder (plugin shared library), configure Bus Decoder parameters and execute higher level analysis. The tool tries to be self descriptive and get as many information as possible from HP16700 for better documenting labor: e.g. test cases, spotted issues and...

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. ...

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie

The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower® digital isolator technology.

Firmware, Receiver software and Hardware design for the Bowsense motion sensor interface. The received data stream can be converted to OSC packets, and distributed to OSC enabled realtime music applications.

This AS511 driver use functions from the Siemens S5 PLC to modify, observe and watch the PLC software. The functions are running on some CPUs. The functions are only tested on PLC 100U CPU 103. Be careful to use the Software. This software can destroy machines and kill human if you are non careful. Please let me know, if you find a bug.

CanFestival focuses on providing an ANSI-C platform independent CANOpen stack that can be implemented as master or slave nodes on PCs, Real-time IPCs, and Microcontrollers. A WxPython based CanOpen Object Dictionary editor GUI is also provided.

monitor software for InSystemDebugging of programs running in an AVR target, using gdb/ddd, under linux, with a simple, low cost interface, which can be used for InSystem or standalone Programming as well.

The IEBus Controller is firmware for at ATMEGA8 to be used with the included circuit. This can be an IEBus sniffer and actually control events on the bus. History: www.angrycamel.com or www.acurazine.com/forums/showthread.php?t=346909&page=1&pp=25