Search Results for "system linux"
Sort By:
Showing 177 open source projects for "system linux"
View related business solutions-
$300 Free Credits to Build on Google CloudStart your next project with $300 in free Google Cloud credit. Spin up VMs, run containers, query petabytes in BigQuery, or build agents with Gemini Enterprise Agent Platform. Once your credits are used, keep building with 20+ always-free tier products including Compute Engine, Cloud Storage, GKE, and Cloud Run functions. No commitment required—just sign up and start building.
-
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
1
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is... -
2
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
3
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
4
Home Assistant
Open source home automation that puts local control and privacy first
Home Assistant is a powerful open source home automation app that prioritizes local control and privacy. It offers great security and features while keeping your data securely out of the cloud. It can give you control of all your devices from a single, mobile-friendly interface and will track the state of all these devices so you don’t have to. Home Assistant is powered by a worldwide community and runs ideally on a Raspberry Pi or a local server. It can be set up to automatically... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
ESPectre
Motion detection system based on Wi-Fi spectre analysis (CSI)
ESPectre is an open-source motion detection system that transforms ordinary Wi-Fi signals into an ambient sensor capable of detecting movement without using cameras, microphones, or additional radio hardware, making it a privacy-preserving and cost-effective alternative for presence sensing and smart home automation. At its core, it analyzes Wi-Fi Channel State Information (CSI) — detailed measurements of how Wi-Fi waves change as they propagate — to mathematically detect disturbances caused... -
6
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on... -
7
Homebridge
HomeKit support for the impatient
Homebridge is a lightweight NodeJS server you can run on your home network that emulates the iOS HomeKit API. It supports Plugins, which are community-contributed modules that provide a basic bridge from HomeKit to various 3rd-party APIs provided by manufacturers of "smart home" devices. Since Siri supports devices added through HomeKit, this means that with Homebridge you can ask Siri to control devices that don't have any support for HomeKit at all. Once your device has been added to... -
8
Ring
Unofficial packages for Ring Doorbells, Cameras, Alarm System
This repo contains unofficial packages to enable interaction and automation with the majority of Ring products. The ring-client-API is a TypeScript package designed to be used by developers to create their own apps/programs which interact with Rings API. homebridge-ring allows users to integrate Ring products into Apple HomeKit via homebridge easily. With Ring you can control your home from your smartphone, tablet or PC. Each Ring device includes a camera, speakers, and an integrated... -
9
Concourse
Concourse is a container-based continuous thing-doer written in Go
Built on the simple mechanics of resources, tasks, and jobs, Concourse presents a general approach to automation that makes it great for CI/CD. Concourse is designed to be expressive, versatile, and safe, remaining intuitive as the complexity of your project grows. A Concourse pipeline is like a distributed, continuous Makefile. Each job has a build plan declaring the job's input resources and what to run with them when they change. Your pipeline is then visualized in the web UI, taking only... -
Error to trace to log to deploy. One click. No SSH.AppSignal links every error to the trace, the trace to the log, the log to the deploy that shipped it.
-
10
homebridge-samsung-tizen
Homebridge plugin for Samsung TV's with Tizen OS
Homebridge Samsung Tizen is a plugin created for Homebridge that allows you to control your Samsung TVs (models starting from 2017) that are running Tizen Operating System. Please make sure to read our shiny documentation where you find step-by-step instructions with images on how to install and configure the plugin. If you find this plugin useful and want to show your support then please star this plugin, or better yet; you can donate through PayPal whatever you think the plugin value is.... -
11
Frigate Home Assistant Integration
Frigate integration for Home Assistant
Frigate Home Assistant Integration connects Frigate, an AI-powered network video recorder, with Home Assistant. It allows Home Assistant users to bring Frigate camera entities, object detection events, sensors, and media access into their smart home dashboard. The integration is commonly installed through HACS, but it still requires Home Assistant configuration after installation. It depends on MQTT, because Frigate communicates many of its events and states through that channel. Users can... -
12
C.A.F.E.
The "Third Way" for Home Assistant Automations
CAFE (Complex Automation Flow Editor) for Home Assistant is an innovative automation authoring tool that provides a visual flow editor inside Home Assistant, offering a “third way” between manual YAML and external flow tools by transpiling visual flows directly into native Home Assistant automation YAML. It’s designed to give users the visual clarity of tools like Node-RED without the overhead of a separate execution engine, storing the logic as standard YAML that runs in the core automation... -
13
Homebridge UniFi Protect
Complete HomeKit integration for UniFi Protect with full support
Complete HomeKit integration for UniFi Protect with full support for most features including autoconfiguration, motion detection, and multiple controllers. homebridge-unifi-protect is a Homebridge plugin that provides HomeKit support to the UniFi Protect device ecosystem. UniFi Protect is Ubiquiti's video security platform, with rich camera, doorbell, and NVR controller hardware options for you to choose from, as well as an app which you can use to view, configure and manage your video... -
14
Infra-red Remote Sampler
Infra-red Remote Control Sampling using FPGA
Infra-red Remote Control Sampling using FPGA -
15
MAX! home automation
MAX! cube GUI
MAX home automation is a GTK+ application to manage ELV/eQ-3 MAX! cubes. A cube is a gateway to a network of radiator thermostats, shutter contacts etc. Radiator and wall-mounted thermostat schedule can be edited uploaded, stored into a file and restored from there. Wall-mounted thermostat temperature graphs are indicated on a separate page sorted by the installation room. HTTP server is provided for integration with HTTP-enabled controls. E.g. thermostats can be queried and controlled... -
16
Basalsure
Basal insulin reminder technology built with Raspberry Pi
Basalsure is a hardware design and software kit to build a basal insulin dose assurance box for users of multiple daily injections (MDI) via syringes. -
17
This is a Java library, which gives low level access to the WS300 weather station from ELV (http://www.elv.de/). There is a web frontend included which displays the weather data in a browser. The following hardware is supported: * WS300 PC (USB) * IPWE1 (LAN) * Raspberry Pi with FS20WUE (LAN)
-
18
MisterHouse is a Windows/Unix home automation program written in Perl. It can respond to voice commands, web browsers, time of day, serial port and X10 data, external files, etc and can speak via Text to Speech engines. Support is on https://sourceforge.net/p/misterhouse/mailman/misterhouse-users/ and code is maintained on https://github.com/hollie/misterhouse
-
19
Home Automation Control Center
An application to control DIY home automation products
This Perl/PostgreSQL application enables to control various do-it-yourself home automation products (such as air conditioning units or electric radiators). The code is highly portable for used with other DB (for example MySQL). It may be used as a scheduler with light modifications. User Interface is provided by the Home Automation Control Center UI project (https://sourceforge.net/projects/climcontrolui) -
20
ZTE-Stat_HA
[BroTech]ZTE Router plugin for Home Assistant 硬路由最佳伴侣
【哥哥科技】中兴路由器 × 全屋智能家居平台联动接入：Home Assistant 极客集成、UI增强脚本插件，硬件路由NPU最佳伴侣、无需刷机，支持全系ZTE！统计上下行流量，查看流量占比速率、上下比值，打击P2P偷上行，支持进制转换，支持Mbps/GiB，可统计内网和公网作对比！设备列表平铺化，大屏可视化一点通，你所要的，都在这里，无需频繁切换页面… ZTE HACS Plugin by Brother Tech. Best for hard NPU routers. Tracks Up/Down traffic & ratios. Detects P2P upload theft. LAN/WAN comparison. Flattened UI for central view. ZTE-Stat_Max & GBNPA-Router-Sync 是由 哥哥科技 开发的一套网络数据遥测与多端转发解决方案。 中兴路由器 × 全屋智能家居平台联动接入插件：Home Assistant... -
21
Home Assistant Config (hass-config)
A different take on designing a Lovelace UI (Dashboard)
hass-config is a user’s home automation configuration repository (for Home Assistant) that captures their YAML files, scripts, automations, dashboards, and integrations in a version-controlled layout. By organizing all Home Assistant components—sensors, automations, scripts, themes, and Lovelace UI definitions—into a structured hierarchy, the repo helps maintain consistency, shareability, and backup of the smart home setup. Because Home Assistant involves complex interdependencies between... -
22
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
23
bctl
1-wire based boiler/DHW/distribution heating system controller
bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. The... -
24
Fritz!Box SmartHome for PRTG
Fritz!Box SmartHome Monitoring with PRTG and AHA-Interface
Sadly, PRTG Network Monitor does not offer sensors for monitoring AVM Fritz!Box SmartHome devices. So here's a Script to build a "ssh advanced sensor" for PRTG to monitor your SmartHome devices. It's based on PHP using the advanced home automation (AHA) interface of a modern Fritz!Box device. Needs a tiny Linux machine with SSH to host it. It should also be easily adoptable to support Nagios & others. Currently tested with: - FRITZ!DECT 301 Heizkörperthermostat - FRITZ!DECT 440 Taster /... -
25
SmartThings
Collects custom SmartApps and Device Handlers in Groovy
The SmartThings repository by krlaframboise collects custom SmartApps and Device Handlers (in Groovy) for the SmartThings home automation platform. It provides a library of community-developed automation logic and device support code to extend SmartThings beyond its built-in offerings. Users can deploy these scripts in the SmartThings IDE to customize device behavior, logging, capabilities, dashboards, notifications, etc. Device Handlers (drivers) for extended hardware support. Examples of...
