Search Results for "remote-server"
Sort By:
Showing 64 open source projects for "remote-server"
View related business solutions-
HubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
-
Google Cloud is a cloud-based service that allows you to create anything from simple websites to complex applications for businesses of all sizes.
-
1
Home Assistant
Open source home automation that puts local control and privacy first
Home Assistant is a powerful open source home automation app that prioritizes local control and privacy. It offers great security and features while keeping your data securely out of the cloud. It can give you control of all your devices from a single, mobile-friendly interface and will track the state of all these devices so you don’t have to. Home Assistant is powered by a worldwide community and runs ideally on a Raspberry Pi or a local server. It can be set up to automatically control... -
2
Homebridge Raspberry Pi Image
Homebridge Raspberry Pi Image based on Raspberry Pi OS Lite
This project provides a free Raspbian-based Raspberry Pi image with Homebridge and Homebridge Config UI X pre-installed. This image also provides a command called hb-config which helps you keep Node.js up-to-date, perform maintenance on your Homebridge server, and install additional optional software such as Pi Hole and deCONZ. The Homebridge service is installed using the method described in the Raspberry Pi Installation Guide on the Homebridge project wiki. The easiest way to flash... -
3
Homebridge
HomeKit support for the impatient
Homebridge is a lightweight NodeJS server you can run on your home network that emulates the iOS HomeKit API. It supports Plugins, which are community-contributed modules that provide a basic bridge from HomeKit to various 3rd-party APIs provided by manufacturers of "smart home" devices. Since Siri supports devices added through HomeKit, this means that with Homebridge you can ask Siri to control devices that don't have any support for HomeKit at all. Once your device has been added to HomeKit... -
4
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required... -
Managing your therapy and rehab practice is a time-consuming process. You spend hours on paperwork, billing, scheduling, and more. Raintree’s Therapy & Rehab EHR is here to help you manage your practice more efficiently. With our all-in-one solution, you’ll get the tools you need to streamline your therapy and rehab practice, improve patient care, and get back to doing what you love.
-
5
homebridge-samsung-tizen
Homebridge plugin for Samsung TV's with Tizen OS
... can also use other methods by checking the Sponsor this project section from the right sidebar. This plugin was designed for Homebridge and will require you to set up a Homebridge server. Homebridge is a lightweight server you can run on your home network that emulates the iOS HomeKit API and allows you to control devices that are incompatible with HomeKit. -
6
SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.
-
7
MAX! home automation
MAX! cube GUI
MAX home automation is a GTK+ application to manage ELV/eQ-3 MAX! cubes. A cube is a gateway to a network of radiator thermostats, shutter contacts etc. Radiator and wall-mounted thermostat schedule can be edited uploaded, stored into a file and restored from there. Wall-mounted thermostat temperature graphs are indicated on a separate page sorted by the installation room. HTTP server is provided for integration with HTTP-enabled controls. E.g. thermostats can be queried and controlled remotely... -
8
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
9
PZEM PC interface (web app)
Peacefair PZEM PC application (web app)
You can check this app online here: https://koshka.ddns.net/pzemweb/v1.1/ (You will need Chrome browser or similar ) A web-app (web-interface) for Peacefair PZEM energy monitors. It is loaded from https web server but works completely on a local machine with local devices and local database. It uses Web Serial API to connect to PZEM devices and IndexedDB to store data. JqGrid and Apexcharts used to display stored data. This application (hopefully) supports simultaneous data exchange... -
Drive amazing product experiences with quality product data.
-
10
HomePowerControl
Monitor and control your home and several energy sources
....) and the server, which is connected to a remote database and will be visualized/controlled on desktop computers, tablets and/or smartphones. The project is based on the current version of the qt classlibrary (v5.4) and qtcreator as the ide! -
11
TOISWITCH
TOISWITCH is a general-Purpose smart-home server for ESP8266
TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful... -
12
langOS
Low power application-configurable Operating System
langOS is an open-source Operating System for Tiny Scale Devices. It supports platforms based on the MSP430 and AVR microcontrollers and is fully written in C. langOS aims to be simple, easy to configure and independent of the development host platform. It should be comfortable on Windows, Linux and MacOS platforms. -
13
Raspberry Pi Push Notifications
Notifications to phone from Raspberry PI for GPIO connected devices
This software is for delivering push notifications to remote devices such as smartphones and tablets from a Raspberry Pi when the Raspberry Pi is connected through its GPIO pins to a device which holds a relay or electronic switch temporarily closed when activated. An example of such as device is a Dakota Alert break beam sensor. -
14
HomePoint
Espressif ESP32 Based Smarthome screen for MQTT
Espressif ESP32 Based Smarthome screen for MQTT. Control your MQTT/HomeKit Smart Home Devices from an ESP32-powered screen. Homepoint is a screen-based interface for MQTT & HomeKit-connected Smarthome devices that runs on the ESP32 Chipset. See partially switched-on scenes with multiple devices at a glance. Support for temperature, humidity, air quality sensors & Tasmota energy readings. Remote Configuration: Configure and reboot HomePoint through a web interface. No need to reflash. Over... -
15
iHome by ionware
iHome Smart Home System Platform
iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for... -
16
openGalaxy
SIA receiver for Galaxy security control panels.
This project aims to provide a method for listening on a serial port and decode incoming messages from a Galaxy security control panel. The messages are transmitted using the SIA DC-03-1990.01 (R2000.11) protocol. The decoded messages are stored in a database (MySQL) or forwarded by email using ssmtp. Besides just listening for messages openGalaxy can also be used to arm/disarm the panel and much more... This software is still in a testing (beta) phase but has been tested successfully... -
17
WiPointer
Control remotely your PC with a simple touch on your android screen.
WiPointer Server emulates the real mouse and keyboard functions. Similar to the newest smart TV remote control (or Nintendo Wii pad), the WiPointer can be used to control your android TV when watching movies, listening to music, surfing on the Internet, PowerPoint presentations and even more! To enjoy this new way of interaction, you only need to install WiPointer on your phone and WiPointer Server on your android TV or PC. No additional configuration is needed! The connection between... -
18
AquarioPi
Automate the schedule of multiple remote controlled aquarium lights
AquarioPi is an IR controller that will change the light settings around the clock on multiple lights, and multiple brands of infrared (IR) remote controlled lights. All that's required is a Raspberry Pi, a resistor, an IR LED, and a breadboard or other type of circuit board or connection to the LED and resistor. Visit the AquarioPi Wiki for more information. -
19
Accent Tool Suite
Accent interfaces and controls systems through goals and policies
... and devices to support home care o Sensor Networks: sensor networks, particularly managing wind farms However, the approach is generic and extensible for managing other kinds of systems. Accent is essentially software. As most of Accent in in Java, it needs at least a Java Runtime Environment but more likely a Java Software Development Kit. To interact with the real world, Accent needs relevant hardware such as a communications server (softswitch) or home automation equipment. -
20
PiHass
Pre-defined and easy to use Home-Assistant Image for raspberry pi
This is a Raspbain Strech base image with Home-Assistant on it. i used Virtual Env based installation and added some Custom Ui and Custom Components. i have also configured MySQL server and database and also some scripts, sensors and groups to help users start working with the system. -
21
Sleep#: Save Power. No More Noise!
Send computer to sleep after VLC, WMP, Google Play Movies & TV
*** For the latest v5 with integrated YouTube Web (controllable with the YouTube app on your phone) please download from https://www.microsoft.com/en-gb/p/sleep/9ppgrg6t7dcj *** Do you use your computer for playback of films, streamed TV etc. before going to sleep? In these cases, Windows' sleep functionality is suspended and won't kick in once the video has finished. The solution for many is to use a sleep timer to send the computer to sleep after the estimated amount of time of... -
22
lumeter is a Qt-based tool for monitoring speeds of various network interfaces on various machines (with the relevant daemon) in your network. For dealing with remote machines it uses xAPlib. For your own machine with lumeter no external daemon needed.
-
23
JSTx is used for displaying overlay graphics and text on top of a Philips television, changing channels, receiving remote control keys and changing television display modes. It is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol for Philips televisions (see http://jointspace.sourceforge.net for details on jointSPACE, which is based on DirectFB). It is used in various home automation/internet-of-things projects. There are three versions...
-
24
Wi-Fi Ducky
Upload, save and run keystroke injection payloads with an ESP8266
... remote connection and holding Ducky Script payloads. Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine. -
25
Extended NEC Protocol Library
Decoding Extended NEC Protocol using PIC18F4550 and TSOP1738
Whenever a key is pressed on TV Remote Controller, TSOP1738 decodes it 38KHz burst and then micro-controller decodes this signal coming from the remote. And if signal is decoded properly then Address and Command is displayed on the 16x2 LCD of the development board. If there is some problem in the command then 0xFF is displayed which means data not decoded properly and there is some problem. TSOP1738 is connected to RB0 pin and my board has 8-LED's connected to PORTB of micro-controller, so i...