Search Results for "gnu-efi"
Sort By:
Showing 159 open source projects for "gnu-efi"
View related business solutions-
Top-Rated Free CRM SoftwareHubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
-
The #1 Embedded Analytics Solution for SaaS Teams.Qrvey’s comprehensive embedded analytics software enables you to design more customizable analytics experiences for your end users.
-
1
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is... -
2
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
3
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on... -
4
Homebridge Docker Image
HomeKit support for the impatient using Docker on x86_64
This Ubuntu Linux based Docker image allows you to run Nfarina's Homebridge on your home network which emulates the iOS HomeKit API. This is a multi-arch image and will run on x86_64, Raspberry Pi 2, 3, 4, Zero 2 W, or other Docker-enabled ARMv7/8 devices. Docker will automatically pull the correct image for your system. Homebridge requires full access to your local network to function correctly. This image will not work when using Docker for Mac or Docker for Windows. The parameters are... -
Red Hat Enterprise Linux on Microsoft AzureRed Hat Enterprise Linux (RHEL) on Microsoft Azure provides a secure, reliable, and flexible foundation for your cloud infrastructure. Red Hat Enterprise Linux on Microsoft Azure is ideal for enterprises seeking to enhance their cloud environment with seamless integration, consistent performance, and comprehensive support.
-
5
Silent Install Helper
Tool for identify installers and installing in silent mode
The application determines the type of installation package and allows you to install programs in "silent" mode (without user intervention). Supported installers: Inno Setup, Smart Installer, Wise installer, NSIS, RAR \ ZIP \ 7z \ 7z Setup \ Free Arc \ Microsoft Cab SFX, Msi, Ghost Installer Wizard, InstallAware Wizard, InstallShield, Setup Factory Installer, Install4j Wizad, Driver Genius Installer, Actual Installer, the files .inf, .msu, and others. The app allows you to create CMD files,... -
6
MAX! home automation
MAX! cube GUI
MAX home automation is a GTK+ application to manage ELV/eQ-3 MAX! cubes. A cube is a gateway to a network of radiator thermostats, shutter contacts etc. Radiator and wall-mounted thermostat schedule can be edited uploaded, stored into a file and restored from there. Wall-mounted thermostat temperature graphs are indicated on a separate page sorted by the installation room. HTTP server is provided for integration with HTTP-enabled controls. E.g. thermostats can be queried and controlled... -
7
Hotstrings
automatic text replacement tool
Microsoft Windows only. Example: you can define text replacement definition which after entering btw/ will automatically replace this string into by the way. Yes, you can define longer replacement text or even one triggerstring can trigger up to 7 versions of text replacements. Added value (💲💲💲): • operating system wide action: no matter in which editable window your cursor is placed, text replacement will work! • this function is similar to "AutoCorrect" function (Microsoft... -
8
Basalsure
Basal insulin reminder technology built with Raspberry Pi
Basalsure is a hardware design and software kit to build a basal insulin dose assurance box for users of multiple daily injections (MDI) via syringes. -
9
Home Automation Control Center
An application to control DIY home automation products
This Perl/PostgreSQL application enables to control various do-it-yourself home automation products (such as air conditioning units or electric radiators). The code is highly portable for used with other DB (for example MySQL). It may be used as a scheduler with light modifications. User Interface is provided by the Home Automation Control Center UI project (https://sourceforge.net/projects/climcontrolui) -
Bright Data - All in One Platform for Proxies and Web ScrapingBright Data offers the highest quality proxies with automated session management, IP rotation, and advanced web unlocking technology. Enjoy reliable, fast performance with easy integration, a user-friendly dashboard, and enterprise-grade scaling. Powered by ethically-sourced residential IPs for seamless web scraping.
-
10
This is a Java library, which gives low level access to the WS300 weather station from ELV (http://www.elv.de/). There is a web frontend included which displays the weather data in a browser. The following hardware is supported: * WS300 PC (USB) * IPWE1 (LAN) * Raspberry Pi with FS20WUE (LAN)
-
11
TOISWITCH
TOISWITCH is a general-Purpose smart-home server for ESP8266
TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful... -
12
bctl
1-wire based boiler/DHW/distribution heating system controller
bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. The... -
13
iSmart Home
An open smart home project.
We utilize technologies such as web-based APP, 2.4G wireless data transceiver, STC micro-controller, various sensors (temperature/humidity/brightness/air pressure/PIR/etc.), to construct an integrated solution of modern home automation. The system provides features such as remotely control your home appliances, lights, etc. Also, various sensors are supported to sense your home environment, and act on real time status accordingly. For instance, if there are people home, and light is dark,... -
14
culfw
GPL'd firmware for the CUL family of devices
culfw is a GPL'd firmware for the CUL family of devices from http://busware.de. culfw is used in conjunction with the CUL/CUN/CUR and a high level software like fhem to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature/humidity/power consumption. culfw supports following RF protocols: "SlowRF" mode: FS20: send/receiveo, FHT: send/receive, S300: receive, EM1000: receive, HMS: receive, Hoermann: receive. ESA2000:... -
15
Kalliope
Kalliope is a framework to create your own personal assistant
Kalliope is a modular always-on voice-controlled personal assistant designed for home automation. Kalliope is a framework that will help you to create your own personal assistant. The concept is to create the brain of your assistant by attaching an input signal (vocal order, scheduled event, MQTT message, GPIO event, etc..) to one or multiple actions called neurons. You can create your own Kalliope bot, by simply choosing and composing the existing neurons without writing any code. But, if... -
16
SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.
-
17
AHK OP Autoclicker
A replica of the OP Auto Clicker in Autohotkey in 200 lines of code
The only TRUE OPEN SOURCE Autoclicker on this site. The OP Autoclicker source code is completely outdated so you can only get it as an EXE A replica of the OP Auto Clicker in Autohotkey in 200 lines of Open Source and Free code. To use, install AutoHotkey here, then you can double click the .ahk file to run. https://www.autohotkey.com/ -
18
TOISWITCH_OLD
A WLAN controlled home-automation switch
Hi, this small project is a Wlan controlled home automation switch featuring -Webserver including authentication -Multiple I/O-ports -Controlling via Web-Interface, MQTT or GET-Requests -Timer -Complex time plans -MQTT including MQTTs and authentication -Easy configuration -
19
Raspberry Pi Push Notifications
Notifications to phone from Raspberry PI for GPIO connected devices
This software is for delivering push notifications to remote devices such as smartphones and tablets from a Raspberry Pi when the Raspberry Pi is connected through its GPIO pins to a device which holds a relay or electronic switch temporarily closed when activated. An example of such as device is a Dakota Alert break beam sensor. -
20
MQTT Hyperdash
A universal MQTT Dashboard for linux/Raspberry Pi.
MQTT-Hyperdash is a fast and efficient dashboard (GUI) for the MQTT framework. It uses the SDL library for graphics rendering, the paho library for communication and the gtk2 framework for user input. The dashboard runs on Linux, but a port to other operating systems is possible. Special features: * Very simple and basic set of base elements. * animated analog input elements, potentiometers. * Fast update rates of 20 Hz are possible. * Easy to use: Each panel/dashboard is... -
21
-
22
iHome by ionware
iHome Smart Home System Platform
iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for... -
23
PiWebcam
Turn a Raspberry Pi into a fully-featured and dummy-proof webcam
PLEASE NOTE: this project has been moved to https://piwebcam.github.io Instructionable: https://www.instructables.com/id/Fully-featured-Outdoor-Security-Camera-Bas -
24
openGalaxy
SIA receiver for Galaxy security control panels.
This project aims to provide a method for listening on a serial port and decode incoming messages from a Galaxy security control panel. The messages are transmitted using the SIA DC-03-1990.01 (R2000.11) protocol. The decoded messages are stored in a database (MySQL) or forwarded by email using ssmtp. Besides just listening for messages openGalaxy can also be used to arm/disarm the panel and much more... This software is still in a testing (beta) phase but has been tested successfully... -
25
Broadlink Manager
Broadlink Manager is a very simple way to work with broadlink rm
Broadlink Manager is a very simple way to work with broadlink rm products. when i just started working with Broadlink via Home Assistant i found out that teching the system a new code was not that simple and user friendly. so after searching the internet i found this little project written in c# that did wat i want, very easy way to work with broadlink. but, my device type was new model and unsupported so i extended the support for all new models and added a feature wich allows me to...