Search Results for "c-sharp"
Sort By:
Showing 138 open source projects for "c-sharp"
View related business solutions-
ConnectWise CPQ, formerly ConnectWise Sell, is a professional quote and proposal automation software for IT solution providers. ConnectWise CPQ offers a wide range of tools that enables IT solution providers to save time, quote more, and win big. Top features include professional quote or proposal templates, product catalog and sourcing, workflow automation, sales reporting, and integrations with best-in-breed solutions like Cisco, Dell, HP, and Salesforce.
-
Chat with your business data with Looker. More than just a modern business intelligence platform, you can turn to Looker for self-service or governed BI, build your own custom applications with trusted metrics, or even bring Looker modeling to your existing BI environment.
-
1
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
2
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is... -
3
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
4
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
... on our Upgrade to v2.0 page. The library has changed from using constants declared as #define to const with the appropriate naming per the C++ style guide. This may potentially cause old programs to not compile. The most likely externally used #defines have been aliased for limited backward compatibility for projects using the old style. Going forward, only the new constant name style will be supported for new protocol additions. -
ConnectWise PSA (formerly Manage) allows you to stop working in separate systems, and helps you build a more profitable business. No more duplicate data entries, inefficient employees, manual invoices, and the inability to accurately track client service issues. Get a behind the scenes look into the award-winning PSA that automates processes for each area of business: sales, help desk, support, finance, and HR.
-
5
SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.
-
6
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
7
T3000_Building_Automation_System
T3000 Bacnet Building Automation System, graphical front end for bldgs
This is our T3000 Building Automation front end, a mature project for managing the air conditioning, lighting, access control and other automation functions of commercial buildings. The application runs on a Windows PC and allows the building operator to manage the building as a complete system. There is a small but growing team of developers working on the application full time. The system works mainly with Temco Controls products but integrators, controls contractors and other... -
8
bctl
1-wire based boiler/DHW/distribution heating system controller
bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle... -
9
Hotstrings
automatic text replacement tool
Microsoft Windows only. Example: you can define text replacement definition which after entering btw/ will automatically replace this string into by the way. Yes, you can define longer replacement text or even one triggerstring can trigger up to 7 versions of text replacements. Added value (💲💲💲): • operating system wide action: no matter in which editable window your cursor is placed, text replacement will work! • this function is similar to "AutoCorrect" function (Microsoft... -
Don’t settle when it comes to managing your clients’ IT infrastructure. Exceed their expectations with ConnectWise RMM, our MSP RMM software that provides proactive tools and NOC services—regardless of device environment. With the number of new vulnerabilities rising each year, smart patching procedures have never been more important. We automatically test and deploy patches when they are viable and restrict patches that are harmful. Get better protection for clients while you spend less time managing endpoints and more time growing your business. It’s tough to locate, afford, and retain quality talent. In fact, 81% of IT leaders say it’s hard to find the recruits they need. Add ConnectWise RMM, NOC services and get the expertise and problem resolution you need to become the advisor your clients demand—without adding headcount.
-
10
langOS
Low power application-configurable Operating System
langOS is an open-source Operating System for Tiny Scale Devices. It supports platforms based on the MSP430 and AVR microcontrollers and is fully written in C. langOS aims to be simple, easy to configure and independent of the development host platform. It should be comfortable on Windows, Linux and MacOS platforms. -
11
TOISWITCH
TOISWITCH is a general-Purpose smart-home server for ESP8266
TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful... -
12
HomePowerControl
Monitor and control your home and several energy sources
The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)... -
13
iSmart Home
An open smart home project.
We utilize technologies such as web-based APP, 2.4G wireless data transceiver, STC micro-controller, various sensors (temperature/humidity/brightness/air pressure/PIR/etc.), to construct an integrated solution of modern home automation. The system provides features such as remotely control your home appliances, lights, etc. Also, various sensors are supported to sense your home environment, and act on real time status accordingly. For instance, if there are people home, and light is dark,... -
14
culfw
GPL'd firmware for the CUL family of devices
culfw is a GPL'd firmware for the CUL family of devices from http://busware.de. culfw is used in conjunction with the CUL/CUN/CUR and a high level software like fhem to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature/humidity/power consumption. culfw supports following RF protocols: "SlowRF" mode: FS20: send/receiveo, FHT: send/receive, S300: receive, EM1000: receive, HMS: receive, Hoermann: receive. ESA2000:... -
15
TOISWITCH_OLD
A WLAN controlled home-automation switch
Hi, this small project is a Wlan controlled home automation switch featuring -Webserver including authentication -Multiple I/O-ports -Controlling via Web-Interface, MQTT or GET-Requests -Timer -Complex time plans -MQTT including MQTTs and authentication -Easy configuration -
16
HomePoint
Espressif ESP32 Based Smarthome screen for MQTT
Espressif ESP32 Based Smarthome screen for MQTT. Control your MQTT/HomeKit Smart Home Devices from an ESP32-powered screen. Homepoint is a screen-based interface for MQTT & HomeKit-connected Smarthome devices that runs on the ESP32 Chipset. See partially switched-on scenes with multiple devices at a glance. Support for temperature, humidity, air quality sensors & Tasmota energy readings. Remote Configuration: Configure and reboot HomePoint through a web interface. No need to reflash.... -
17
AutoMine AutoRun
Create or record and edit missing keybindings, automate, be handsfree!
Press a created keybinding and go AFK, these keybindings will let you start automated keyboard and mouse input you recorded and edited yourself. Supports recording, editing and creating any keybindings to initiate automatic keyboard and mouse input. The tool will start preloaded with 2 keybindings that allow Auto-Run and Auto-Mine. AutoMine by pressing F5 will hold left click [LMB] when enabled AutoRun by pressing F6 will hold [W] + [LShift] when enabled This tool was made as a... -
18
MQTT Hyperdash
A universal MQTT Dashboard for linux/Raspberry Pi.
MQTT-Hyperdash is a fast and efficient dashboard (GUI) for the MQTT framework. It uses the SDL library for graphics rendering, the paho library for communication and the gtk2 framework for user input. The dashboard runs on Linux, but a port to other operating systems is possible. Special features: * Very simple and basic set of base elements. * animated analog input elements, potentiometers. * Fast update rates of 20 Hz are possible. * Easy to use: Each panel/dashboard is... -
19
-
20
iHome by ionware
iHome Smart Home System Platform
... Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. See - ionware.io/free-offer/ -
21
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &... -
22
openGalaxy
SIA receiver for Galaxy security control panels.
This project aims to provide a method for listening on a serial port and decode incoming messages from a Galaxy security control panel. The messages are transmitted using the SIA DC-03-1990.01 (R2000.11) protocol. The decoded messages are stored in a database (MySQL) or forwarded by email using ssmtp. Besides just listening for messages openGalaxy can also be used to arm/disarm the panel and much more... This software is still in a testing (beta) phase but has been tested successfully... -
23
Broadlink Manager
Broadlink Manager is a very simple way to work with broadlink rm
Broadlink Manager is a very simple way to work with broadlink rm products. when i just started working with Broadlink via Home Assistant i found out that teching the system a new code was not that simple and user friendly. so after searching the internet i found this little project written in c# that did wat i want, very easy way to work with broadlink. but, my device type was new model and unsupported so i extended the support for all new models and added a feature wich allows me to add... -
24
Sleep#: Save Power. No More Noise!
Send computer to sleep after VLC, WMP, Google Play Movies & TV
*** For the latest v5 with integrated YouTube Web (controllable with the YouTube app on your phone) please download from https://www.microsoft.com/en-gb/p/sleep/9ppgrg6t7dcj *** Do you use your computer for playback of films, streamed TV etc. before going to sleep? In these cases, Windows' sleep functionality is suspended and won't kick in once the video has finished. The solution for many is to use a sleep timer to send the computer to sleep after the estimated amount of time of... -
25
Circonium
C# custom control for round gauge creating and tuning.
Demo shows the possibilities of managing custom control project https://circonium.sourceforge.io Control provides tools for creating circular scales with marking on segments and automatic recalculation of the input value into the rotation angle of the arrow. Control contains GDI graphics and does not use OpenGL, or other 3D libraries. How to generate settings for Circonium Control and how apply it on start you Winform Application using that control - look at next...