Search Results for "zebra design 3"

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...

This project experiments with C language to discover and design a programmable guitar amplifier effects micro controller computer section of a tube and solid state designed guitar amp. This a collaboration electronics project with my son. The goal of this project is to use Arduino hardware with C language programming to manipulate the guitar signal by various effects of phaser, flanger, reverb, digital delay and echo, and tremelo.

A cryptoprocessor is a processor that does not do or use any encryption or decryption (thus escapes US export controls), but which works natively on encrypted data and code. Almost any encryption is possible, including "none at all". The trick is that a computer famously and happily takes garbage in and puts garbage out, just as happily as it does "2+2=4", so all we have to do is change our OWN idea of what is garbage and what is sense and the computer will remain happy but we then have a...

The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source...

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as...

This program is a cross-platform replacement for the widely known in close circles Parameter Design tool (also known as Keywin e-Bike Lab), used to set the parameters of a e-bike controller based on the Infineon XC846 microcontroller (and various clones).

FPGAsm is a low-level alternative to verilog and VHDL. A near-instant 'assembler for FPGAs', this simple yet powerful language facilitates bottom-up design, layout and wiring of modules, and generation of .xdl output. With about 10 keywords to learn, you can start making circuits in minutes. Now you can focus on learning the ins and outs of the FPGA instead of complex tools and languages. Fast turnaround time and bottom-up approach invite exploration, experimentation, live circuit...

Java library that interfaces with "The USB INSTEON PowerLinc Controller" built by Smartlabs Design. This library is built on top of the javax.usb linux reference implementation, but should work under Windows as well.

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

The purpose of the Programmable Chip EEG BCI project is to create a EEG that is modernized with some of the latest hardware. The Design uses lower amplification and higher bit analog to digital converters to remove the need for filtering and amplifying.

unPIC is a Perl script that disassembles Microchip microcontroller's HEX files. This is a powerful tool for all reverse engeneers that creates a well understandable assembly source from a binary file. Creates xrefs, labels, subroutines and much more...

CONECT is a software to design, setup, commission and test home and building-automation systems. It will support various bus systems such as EIB.

The goal of this project is to build a centralized domotic system. This project contents three parts: - An electronic part; - An embedded software part (PIC Microship controller); - A PC software part (Dotnet/Mono)