Search Results for "linux android tool"
Sort By:
Showing 62 open source projects for "linux android tool"
View related business solutions-
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
Earn up to 16% annual interest with Nexo.Put idle assets to work with competitive interest rates, borrow without selling, and trade with precision. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
Betaflight
Open Source Flight Controller Firmware
...Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more! Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. An easy-to-use drag-and-drop configuration allows the placement of values like used mAh and LiPo Voltage readings. Additionally, you can change most firmware settings using stick commands without even removing your goggles. -
2
Lan Mouse
mouse & keyboard sharing via LAN
Lan Mouse is a mouse and keyboard-sharing software similar to universal control on Apple devices. It allows for using multiple PCs with a single set of mouse and keyboard. This is also known as a Software KVM switch. The primary target is Wayland on Linux but Windows MacOS and Linux on Xorg have partial support as well (see below for more details). Focus lies on performance and a clean, manageable implementation that can easily be expanded to support additional backends like e.g. Android, iOS. -
3
libusb
A cross-platform library to access USB devices
libusb is a library for USB device access from Linux, macOS, Windows, OpenBSD/NetBSD, Haiku and Solaris userspace. It is written in C (Haiku backend in C++) and licensed under the GNU Lesser General Public License version 2.1 or, at your option, any later version. libusb is a C library that provides generic access to USB devices. It is intended to be used by developers to facilitate the production of applications that communicate with USB hardware. Using a single cross-platform API, it... -
4
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. Easily copy and paste between computers with no effort at... -
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
5
FKILL
Cross-platform tool to kill processes
To kill a port, prefix it with a colon. For example: :8080. Run without arguments to use the interactive interface. Run fkill without arguments to launch the interactive UI. Force kill processes that did not exit within the given number of milliseconds. Kill all child processes along with the parent process. (Windows only). Ignore capitalization when killing a process. Note that the case is always ignored on Windows. Suppress all error messages. For example: Process doesn't exist. -
6
libusb
A cross-platform library that gives apps easy access to USB devices
Library to enable user space application programs to communicate with USB devices -
7
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 315,000+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ... -
8
IPMI Management Utilities
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments. -
9
myFP2ESP32-Dev WiFi ASCOM Focuser
ASCOM-INDI ESP32-Dev Wifi focuser
An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate... -
Fully Managed MySQL, PostgreSQL, and SQL ServerCloud SQL handles your database ops end to end, so you can focus on your app.
-
10
AIO-Driver-Update
AIO Driver Updater For Windows
AIO Driver Update for Windows – Ensure Your System Runs Smoothly with the Latest Drivers Keep your Windows PC up-to-date and running at peak performance with the AIO Driver Update tool. This all-in-one solution scans your system for outdated drivers, offering fast and easy updates to improve hardware performance, stability, and overall system speed. Whether you're a gamer, creative professional, or everyday user, keeping your drivers current is essential. The AIO Driver Update tool... -
11
Agat Hardware
Create replicas of Agat Hardware
This project is dedicated to creation PCB replicas of Agat Hardware. Most of the PCBs are created using Kicad Open source tool. -
12
GSmartControl
Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it. -
13
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's GMC-300/500/600 , RadMon, RadPro, Gamma-Scout, audio-click and other low-cost Geiger counters, IoT devices, I2C based sensors, GQ EMF devices. ... -
14
kmicommbusmediator
"KMI Comm. Bus Mediator"
"KMI Comm. Bus Mediator" ("kmicommbusmediator") The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi 4 Model B" and "Raspberry Pi 5" to the "PPG Communication Bus" which is used by PPG devices such as the "Wave 2.2", "Wave 2.3", "EVU", "PRK", "Waveterm A", "Waveterm B". "kmicommbusmediator" contains hardware and software components: * "kmicommbusmediator-HW": "Comm. Bus" hardware-interface * "CBMEDIBIOS": firmware for "kmicommbusmediator-HW" *... -
15
CommBusTerm
"CommBusTerm"
"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor *... -
16
MisterHouse is a Windows/Unix home automation program written in Perl. It can respond to voice commands, web browsers, time of day, serial port and X10 data, external files, etc and can speak via Text to Speech engines. Support is on https://sourceforge.net/p/misterhouse/mailman/misterhouse-users/ and code is maintained on https://github.com/hollie/misterhouse
-
17
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
18
LSJ-Link
시리얼 통신 프로그램 (Serial Control Program)
[Summary / 한글 설명] LSJ-Link는 개발자와 엔지니어를 위한 직관적인 시리얼 통신 터미널 프로그램입니다. 아두이노(Arduino), 임베디드 보드와의 안정적인 데이터 송수신을 지원하며, 복잡한 설정 없이도 즉각적으로 하드웨어를 제어할 수 있도록 설계되었습니다. 루시퍼(Lucifer) 런처의 핵심 통신 엔진을 독립형 버전으로 만나보세요. [Key Features / 주요 기능] Instant Connectivity: 간단한 포트 및 보드레이트(Baud rate) 설정으로 즉시 연결 가능. Real-time Monitoring: 송수신 데이터를 실시간 로그창으로 확인. Lightweight & Fast: 군더더기 없는 로직으로 시스템 자원 점유율 최소화. User-friendly Interface: 직관적인 UI로 초보자부터 전문가까지 쉽게 사용. [Short Description (영문... -
19
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
20
USB Gadget Tool
Convert your Android phone to any USB device you like
Convert your Android phone to any USB device you like. USB Gadget Tool allows you to create and activate USB device roles, like a mouse or a keyboard. Connected USB hosts (e.g. a normal computer) will then identify your Android device only under that role. It can also be used to deactivate the standard USB Gadget (including mtp, adb, etc.), e.g. for security reasons. -
21
RaspberryLight
Make your Raspberry Pi to a Wi-Fi controllable LED Light
Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet. WiringPi is used to control the GPIOs for some feature and Indy... -
22
SulinOS
Indipendent distro uses inary package system. Sulin is roolling donkey
Sulin is rolling donkey Gitlab: https://gitlab.com/sulinos Github: https://github.com/sulinos Telegram: https://t.me/sulinos powered by donkey team -
23
HDDtempNC
Tool to acquire hard disk drive temperature from the network interface
###### HDDtempNC has now moved to Github ###### ###### Please visit the Github project at https://github.com/viharm/HDDtempNC ###### HDDtempNC provides a script to acquire hard disk drive temperature for a target host by querying an existing HDDtemp daemon and then parse the results according to the request. See project wiki for more details, usage and code. -
24
usb-resetter
Simple graphical usb reset tool
USB resetting is the closest equivalent to physically unplugging and re-plugging a USB device. you might ask , How is that useful ? well the use cases will be different from user to another. In my case, it helps with accessing my slightly damaged old USB external hard drive after a mount in unix-like OSes without any i/o issues. Another one is, loop resetting my USB headset solves some weird glitching sound i constantly have while using them. Those are my special use cases. There most be... -
25
Wi-PWN
ESP8266 firmware for performing deauthentication attacks
ESP8266 firmware for performing deauthentication attacks, with ease. Wi-PWN is a firmware that performs death attacks on cheap Arduino boards. The ESP8266 is a cheap microcontroller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to...
