Showing 18 open source projects for "led"

View related business solutions
  • Your monitoring isn't a stack. It's a pile. Fix that. Icon
    Your monitoring isn't a stack. It's a pile. Fix that.

    Errors, performance, logs, uptime. One install, one invoice, one UI.

    Replace Datadog, New Relic, and Sentry without adding three more dashboards.
    Free 30 days.
  • Build Agents and Models on One Platform Icon
    Build Agents and Models on One Platform

    Everything you need to build production-ready agents and models. Access 200+ Google and third-party AI models and tools.

    Gemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
    Try It Free
  • 1
    Betaflight

    Betaflight

    Open Source Flight Controller Firmware

    Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...
    Downloads: 208 This Week
    Last Update:
    See Project
  • 2
    Particle Firmware for the Electron, P1

    Particle Firmware for the Electron, P1

    Device OS (Firmware) for particle devices

    The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle...
    Downloads: 1 This Week
    Last Update:
    See Project
  • 3
    Arduino Nano Dew Controller Pro (DIY)

    Arduino Nano Dew Controller Pro (DIY)

    Dew Controller Feature Rich

    A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...
    Leader badge
    Downloads: 56 This Week
    Last Update:
    See Project
  • 4
    Arduino ASCOM Focuser Pro DIY

    Arduino ASCOM Focuser Pro DIY

    Arduino Focuser, fully ASCOM complaint

    myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download
    Downloads: 171 This Week
    Last Update:
    See Project
  • $300 Free Credits for Your Google Cloud Projects Icon
    $300 Free Credits for Your Google Cloud Projects

    Start building on Google Cloud with $300 in free credits. No commitment, no credit card required until you're ready to scale.

    Launch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
    Start Free Trial
  • 5
    blinker-library

    blinker-library

    An IoT Solution,Blinker library for embedded hardware

    ...When we learn new embedded hardware, we usually started with the sketch Blink. We think Blink is the hello world of embedded hardware. We aim to build an easy learn IoT solution project, which is like Blink a led. So we named this project blinker with this inspiration. blinker is a cross-hardware, cross-platform solution for the IoT. It provides APP, device, and server support, and uses public cloud services for data transmission and storage. It can be used in smart homes, data monitoring, and other fields to help users build Internet of Things projects better and faster.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 6

    ShiftRC

    Simple cheap DIY RC receiver/handler.

    ...this project will host multiple version, some very simple ones, and some more complex. a similar thing can be said for the controllers, I will soon upload the schematics and designs for a steampunk style controller. but for a more simple understanding a simple remote might be a transmitter(led, speaker, or antenna for example) a button, and a capacitor to stabilize the button because every pulse you send changes the state. however high precission control is possible. Use the project and schematics however you want it as long as it does NOT restrict others.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 7

    RaspberryLight

    Make your Raspberry Pi to a Wi-Fi controllable LED Light

    Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 8
    myDCFocuser Arduino Relative DC Focuser

    myDCFocuser Arduino Relative DC Focuser

    Arduino Nano DC Motor Controller

    An Arduino based controller for a DC motor focuser solution. Replaces RigelSys/JMI DC Controllers. Windows application and ASCOM driver available. Works with most DC motor solutions (eg RigelSys, JMI, Orion, Skywatcher etc). Feature rich and low cost. Build the controller for under $25. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given...
    Downloads: 1 This Week
    Last Update:
    See Project
  • 9
    Disk Led Monitor
    Disk Led Monitor and a very simple little program that shows the activity of the main hard drive using colored icons to place on the taskbar, to get an idea look at the image more of this page.
    Downloads: 0 This Week
    Last Update:
    See Project
  • Build Securely on AWS with Proven Frameworks Icon
    Build Securely on AWS with Proven Frameworks

    Lay a foundation for success with Tested Reference Architectures developed by Fortinet’s experts. Learn more in this white paper.

    Moving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
    Download Now
  • 10
    HDD Activity Guage/LED Tray Icon

    HDD Activity Guage/LED Tray Icon

    Show physical HDD activities in LED style or performance gauge style

    Show physical HDD (fixed or removable) activities in LED style or performance meter gauge style. Both Win32/Win64 versions are provided. (Virus/Torjan scanned using Avira Pro.) The memory footprint is small and the CPU utilization is also very low (~ 0%), you can verify this by opening your Task Manager (Ctrl-Shift-Esc). This is originally mainly for my personal use since newer notebooks does not have HDD LED light so I quickly write a replacement using Visual Studio C++ 2010. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 11
    PowerLed

    PowerLed

    RGB power indicator

    This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet.
    Downloads: 10 This Week
    Last Update:
    See Project
  • 12
    HSK

    HSK

    High Speed Karlsruhe open automotive code initiative

    Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 13

    Antec Kuhler 920 Linux Driver/Control

    Antec Kuhler 920 Linux Driver/Control

    Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 14
    VisualCube is a volumetric display out of 6*6*6 voxels, where each voxel get's represented by a 2-color LED. This project includes a bunch of tools used to control this peace of hardware, by taking advantage of the VisualCube library.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 15
    Windows application released under GNU to precisely control color values for Alienware's AlienFX LED color schemes.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 16
    Full functional PS/2 keyboard on Atmega16, works with simple circuits, and fully customizable. Performs really great! - ps2 / keyboard / ps2avr / controller / avr / hardware
    Downloads: 0 This Week
    Last Update:
    See Project
  • 17
    This project aims to provide a fully functional GUI [and command line] interface to control the "USB LED Message Board v1.0" HW, by dreamcheeky. It allows local and remote multi-user control.
    Downloads: 1 This Week
    Last Update:
    See Project
  • 18
    This project makes it possible to switch 8 LEDS over a USB connection. It indicates the CPU work or animations. The following page contains the schematic, firmware ... http://www.cesko.host.sk/IgorPlugUSB_RS232/IgorPlug-USB%20(AVR)%20RS232_eng.htm
    Leader badge
    Downloads: 4 This Week
    Last Update:
    See Project
  • Previous
  • You're on page 1
  • Next
Auth0 Logo