Showing 35 open source projects for "led"

View related business solutions
  • $300 Free Credits for Your Google Cloud Projects Icon
    $300 Free Credits for Your Google Cloud Projects

    Start building on Google Cloud with $300 in free credits. No commitment, no credit card required until you're ready to scale.

    Launch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
    Start Free Trial
  • Build Securely on AWS with Proven Frameworks Icon
    Build Securely on AWS with Proven Frameworks

    Lay a foundation for success with Tested Reference Architectures developed by Fortinet’s experts. Learn more in this white paper.

    Moving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
    Download Now
  • 1
    Betaflight

    Betaflight

    Open Source Flight Controller Firmware

    Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...
    Downloads: 208 This Week
    Last Update:
    See Project
  • 2
    ESP32-Paxcounter

    ESP32-Paxcounter

    Wifi & BLE driven passenger flow metering with cheap ESP32 boards

    ...Data can either be stored on a local SD-card, transferred to the cloud using LoRaWAN network or MQTT over TCP/IP, or transmitted to localhost using serial (SPI) interface. LED Matrix display (similar to this 64x16 model, can be ordered on Aliexpress). SD-card (see section SD-card here) for logging pax data.
    Downloads: 1 This Week
    Last Update:
    See Project
  • 3
    Particle Firmware for the Electron, P1

    Particle Firmware for the Electron, P1

    Device OS (Firmware) for particle devices

    The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle...
    Downloads: 1 This Week
    Last Update:
    See Project
  • 4
    LEDSpicer

    LEDSpicer

    LEDSpicer a LED Animator and Controller for Linux

    LEDSpicer is a linear LED controller daemon that will handle single color or a RGB LEDs connected to different devices. It allows the execution of animations and profiles and handle can input to interact with the LEDs, profiles can be triggered based on different events, like programs running, network input, game name, etc. Includes some utilities to make an arcade cabinet more attractive and cool!
    Downloads: 2 This Week
    Last Update:
    See Project
  • Build Agents and Models on One Platform Icon
    Build Agents and Models on One Platform

    Everything you need to build production-ready agents and models. Access 200+ Google and third-party AI models and tools.

    Gemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
    Try It Free
  • 5
    Arduino Nano Dew Controller Pro (DIY)

    Arduino Nano Dew Controller Pro (DIY)

    Dew Controller Feature Rich

    A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...
    Leader badge
    Downloads: 56 This Week
    Last Update:
    See Project
  • 6
    Arduino ASCOM Focuser Pro DIY

    Arduino ASCOM Focuser Pro DIY

    Arduino Focuser, fully ASCOM complaint

    myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download
    Downloads: 171 This Week
    Last Update:
    See Project
  • 7
    blinker-library

    blinker-library

    An IoT Solution,Blinker library for embedded hardware

    ...When we learn new embedded hardware, we usually started with the sketch Blink. We think Blink is the hello world of embedded hardware. We aim to build an easy learn IoT solution project, which is like Blink a led. So we named this project blinker with this inspiration. blinker is a cross-hardware, cross-platform solution for the IoT. It provides APP, device, and server support, and uses public cloud services for data transmission and storage. It can be used in smart homes, data monitoring, and other fields to help users build Internet of Things projects better and faster.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 8

    ArduinoLED

    Demonstrating connection of smartphone to silple SSL server on Arduino

    The small project, demonstrating connection of Android application to the SSL server on Arduino (WeMos D1 board), which can change the color intensity on the RGB LED (KY-016)
    Downloads: 0 This Week
    Last Update:
    See Project
  • 9

    ShiftRC

    Simple cheap DIY RC receiver/handler.

    ...this project will host multiple version, some very simple ones, and some more complex. a similar thing can be said for the controllers, I will soon upload the schematics and designs for a steampunk style controller. but for a more simple understanding a simple remote might be a transmitter(led, speaker, or antenna for example) a button, and a capacitor to stabilize the button because every pulse you send changes the state. however high precission control is possible. Use the project and schematics however you want it as long as it does NOT restrict others.
    Downloads: 0 This Week
    Last Update:
    See Project
  • MongoDB Atlas runs apps anywhere Icon
    MongoDB Atlas runs apps anywhere

    Deploy in 115+ regions with the modern database for every enterprise.

    MongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
    Start Free
  • 10

    RaspberryLight

    Make your Raspberry Pi to a Wi-Fi controllable LED Light

    Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 11
    myDCFocuser Arduino Relative DC Focuser

    myDCFocuser Arduino Relative DC Focuser

    Arduino Nano DC Motor Controller

    An Arduino based controller for a DC motor focuser solution. Replaces RigelSys/JMI DC Controllers. Windows application and ASCOM driver available. Works with most DC motor solutions (eg RigelSys, JMI, Orion, Skywatcher etc). Feature rich and low cost. Build the controller for under $25. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given...
    Downloads: 1 This Week
    Last Update:
    See Project
  • 12
    GROWbox Supervisor System (GROWSS)

    GROWbox Supervisor System (GROWSS)

    Automated Plant Environment Growing System using Raspberry Pi

    GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 13
    Disk Led Monitor
    Disk Led Monitor and a very simple little program that shows the activity of the main hard drive using colored icons to place on the taskbar, to get an idea look at the image more of this page.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 14
    HDD Activity Guage/LED Tray Icon

    HDD Activity Guage/LED Tray Icon

    Show physical HDD activities in LED style or performance gauge style

    Show physical HDD (fixed or removable) activities in LED style or performance meter gauge style. Both Win32/Win64 versions are provided. (Virus/Torjan scanned using Avira Pro.) The memory footprint is small and the CPU utilization is also very low (~ 0%), you can verify this by opening your Task Manager (Ctrl-Shift-Esc). This is originally mainly for my personal use since newer notebooks does not have HDD LED light so I quickly write a replacement using Visual Studio C++ 2010. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 15
    PowerLed

    PowerLed

    RGB power indicator

    This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet.
    Downloads: 10 This Week
    Last Update:
    See Project
  • 16
    HSK

    HSK

    High Speed Karlsruhe open automotive code initiative

    Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 17

    Pi Snowflake

    A Raspberry Pi driven LED Snowflake

    Initially this project started as hobby to build a "cool" christmas LED decoration. The result was 175 RGB LED snowflake driven by a Raspberry Pi. Since the hardware prototype is finished it's time to share the software and documentation...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 18

    Antec Kuhler 920 Linux Driver/Control

    Antec Kuhler 920 Linux Driver/Control

    Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 19

    RGBLightControl

    LED Color Control System for RaspberryPi and Dreambox

    This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!
    Downloads: 0 This Week
    Last Update:
    See Project
  • 20

    VPreproc

    C++ Verilog macro preprocessor

    This is a standalone preprocessor for the Verilog HDL language. It is modified from the Verilog-PreProcessor of Verilog Perl tool 3.314. Most of the code is written by the team led by Wilson Snyder. What I have done in this project: * Provide a standalone command line interface (without Perl). * Replace the parts implemented in Perl to C++. * Encapsulate the package in a separated namespace for better independence. What I may do in the future: * Replace the C language features to C++. * Optimise some code for better reading or performance. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 21

    ThinkPad ACPI Extras Driver

    Linux kernel driver for ThinkPad laptops

    This is a Linux driver for ThinkPad laptops, written by Borislav Deianov and Henrique de Moraes Holschuh. It aims to support various features of these laptops which are accessible through a ThinkPad-specific ACPI framework. The newest version is available in the latest version of the Linux kernel.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 22
    linux driver and utility for CH MFP
    User-space linux driver & application for CH Multi Function Panel: support of all 50 keys, green / red led - simulate keys (keyboard, mouse, joystick,...), mouse & joystick axes - use macros for any key sequence & timings - supports up to 16 MFPs
    Downloads: 0 This Week
    Last Update:
    See Project
  • 23
    VisualCube is a volumetric display out of 6*6*6 voxels, where each voxel get's represented by a 2-color LED. This project includes a bunch of tools used to control this peace of hardware, by taking advantage of the VisualCube library.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 24
    A Linux Library and GUI to control the Luxeed U7 LED Keyboard. Uses libusb 1.0 to communicate with the keyboard.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 25
    Toolset to control the Tt eSPORTS Challenger Pro(TM) Keyboard from Linux
    Downloads: 0 This Week
    Last Update:
    See Project
  • Previous
  • You're on page 1
  • 2
  • Next
Auth0 Logo