Search Results for "code" - Page 3

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

...You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your infrared remote control and when you press that button IRK! will send the corresponding USB keystroke to the host computer. You can program *any* USB Consumer Device control code too...for example, Play, Pause, Mute, Volume up, Volume down, and many others.

...The library provides components to implement both a ModBus master and a Modbus slave, and is based on the Indy component set (both Indy 9 and 10 are supported) De source code of the project has been moved to GitHub!

...MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.

GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates..

This project provides an improved interface to the atcoreA driver used to control Andor cameras using SDK3 - namely their sCMOS cameras Neo and Zyla. The interface now includes LabVIEW error handling and buffer handling code along with examples of how to operate the cameras from a dataflow environment.

Custom vJoy feeder code for Leap Motion controller. You will need the Leap Motion SDK from Leapmotion.com as well as vJoystick installed along with the vJoystick 2.02 SDK from http://vjoystick.sourceforge.net/ See the wiki for more info.

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

This is a .NET wrapper library for vJoy, a virtual joystick driver for Windows. It only works with the PPJoy-compatible versions of vJoy. http://sourceforge.net/projects/vjoystick/ Some code borrowed from PPJoyWrapper http://sourceforge.net/projects/ppjoylib/ See the wiki for usage instructions.

The Cobos Project is an Open Source initiative from Metrixware, dedicated to Mainframe COBOL CICS, DB2, IMS developments within the Eclipse Platform.

...The software also allows users to benchmark processing and memory utilization by dynamically adding threads and building arrays to test memory capacity. Server Benchmark is also a great way to maximize capacity and test response from within your existing Citrix XenApp farm, and VDI infrastructure. Source code is attached to the "Source" folder.

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

Brahma is an open-source library written for the .NET 3.5 framework (in C# 3.0), to provide high-level access to parallel streaming computations on a variety of processors, including GPUs.

This project provides a chip card interface device driver for the PC/SC Lite server deamon (pcscd). The driver provides a standard PC/SC interface to NFC devices supported by libnfc. Note, that this project is currently not actively developed. However, the code has been adopted by the libnfc-Team. See https://code.google.com/p/ifdnfc/source/checkout.

Schematics and micro-controller code for a version of the scoring apparatus used in competitive fencing and a compatible remote control.

JTAG interface library for FTDI chips. Linux port of the ftcjtag library from ftdi( http://bit.ly/98Vul3 ). Implementation relies on ftd2xx.so ( not libftdi.so ) which makes it windows compatible.

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

...No need to install drivers,plug the device and use it ! Normal/Red/Green/Blue prog levels supported ! Download the file that matches your OS in the "Files" section. GPLv3 (Source code)

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

CRC Generator is a command-line application that generates Verilog or VHDL code for CRC of any data width between 1 and 1024 and polynomial width between 1 and 1024. The code is written in C for Win32, bus easily portable for other platforms

New programming language for SPS devices like Amtel Controller . The basic element of this language will be small Moduls of Code which work parallel (Multitasking). A Module can work indepent or with addiction to other Moduls.

The Make Controller is an open microcontroller platform for Makers of all kinds, by MakingThings. Note - current code is hosted on the MakingThings site at https://www.makingthings.com/svn

This code programmed into an AVR microcontroller wired to the receiver's JTAG port allows loading unsigned code on SMP8634 based media receivers enabling you to boot other operating systems e.g. Linux. (Only x30Xt receivers are currently supported)

This is an opensource project for the calculation of the mathematical constant Pi. If you are a mathematician or programer please contribute ideas or code for this project. Non professionals are also welcome to contribute.

A collection of device drivers and system level code to enable user-space to directly interact with hardware and system features, bypassing the kernel, to effectively enable user-space device drivers.