Open Source VHDL/Verilog Hardware Platforms

AWS EC2 FPGA Development Kit is a set of development and runtime tools to develop, simulate, debug, compile and run hardware-accelerated applications on Amazon EC2 F1 instances. It is distributed between this GitHub repository and FPGA Developer AMI - Centos/AL2 provided by AWS with no cost of development tools. After creating an FPGA design (also called CL - Custom logic), developers can create an Amazon FPGA Image (AFI) and easily deploy it to an F1 instance. AFIs are reusable, shareable and can be deployed in a scalable and secure way. Development experience leverages an optimized compiler to allow easy new accelerator development or migration of existing C/C++/openCL, Verilog/VHDL to AWS FPGA instances. Fully custom hardware development experience provides hardware developers with the tools required for developing AFIs for AWS FPGA instances.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

CRC Generator is a command-line application that generates Verilog or VHDL code for CRC of any data width between 1 and 1024 and polynomial width between 1 and 1024. The code is written in C for Win32, bus easily portable for other platforms

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. In order to run the system in hardware a SDRAM and SRAM controller need to be added. These are currently in development.

Devellopement d'un controlleur d'affichage (VIC) du commodore 64 embarqué dans un FPGA avec controlleur d'animation integré.

The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source library facilitates research and development in approximate computing at higher abstraction levels, and to facilitate reproducible research and comparisons. In case of usage, please refer to our publication: Muhammad Shafique, Rehan Hafiz, Semeen Rehman, Walaa El-Harouni, Jörg Henkel, "Cross-Layer Approximate Computing: From Logic to Architectures", Design Automation Conference (DAC), 2016. Contributors: Authors, Vanshika Baoni, M. Abdullah Hanif http://ces.itec.kit.edu/lpACLib.php

This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

The Affordable BIOS Restoration Tool provides VHDL and C code to recover from failed BIOS upgrades using affordable CPLD's. EEPROM's and Flash chips can be restored with this flash programmer. Interfaces for DIP and tsop packages are being developed.

Development of a fully designed alarm clock implemented on the Xilinx Spartan3 board.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

BlowfishVHDL - free fully synthesizable Blowfish encryption algorithm hardware implementation.

a micro processor 16 bits optimized to hold in a CPLD

A new 64-bit RISC platform, complemented by a set of development tools, standards specifications and synthesizable VHDL implementations.

This is a simple CPU design, written in Verilog, intended for educational purposes. The objective is to provide a simulatable processor where the source code exposes concepts in CPU microarchitecture.

libhdlfltp is a VHDL library of floating point operators, all of which are parametrized, synthesizable to FPGAs and cover a number of the core operators in math.h.

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol

This project aims at creating an open-source SoC that will support the Google TV platform.

Platform for advanced open source IP-Core development, i. e. dynamic memory controllers for FPGAs.

This project aims to develop a colour-based vision processing system for use in RoboCup. We are using a CCD camera for input to an FPGA. The system locates coloured objects and outputs detected corners.

Expansion card for 8 bit computer Sharp MZ-800. Connection to SD / MMC card with FAT16 filesystem. Emulated FD controller. MZF repository. This project is already stoped. Please see the MZ800 Unicard 2nd generation https://sourceforge.net/projects/mz800ukp1/

Sharp MZ800 univerzalni karta periferii 1 ----------------------------------------- Contains peripherals: emulator of FDC WD279x, RTC, single channel SIO, repository manager, LAN10Mbit Chips on the card: STM32F101, XC9356, ENC28J60, FT232RL, MAX3232

Video and files download for Visual trading idea to C++ or FPGA HFT Meetup File download sample: test model (Matlab 2014b with Visual Studio 2013 C++ project generated) Powerpoint MATLAB SIMULINK http://quantlabs.net/blog/2015/04/video-and-files-download-for-visual-trading-idea-to-c-or-fpga-hft-meetup/

The OS561 operating system based around FORTH/Java. The OS is to run on a VHDL chip OpenHardware design called the Minon, but could become available for other platforms. The unique point of the design is a revolutionary data compression technology.

A hardware project to interface a microcontroller (currently PIC family) to a LED driver consisting of a CPLD to drive an LED array with 35 LEDs... The source codes (c/vhdl) and schematics are going to be freely available

OpenWebServo is an Open Source Hardware and Software project. Its main goal is to develop a web-controlled servo system. The project includes web application, firmware and hardware design.