Search Results for "xtream-codes"

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full...

...The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card. Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. Because it uses e-ink, the card can display static content with minimal power drain, making it practical for real-world card use. The repository includes board design files, firmware, and supporting software for customizing what the card shows. ...

...Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit.

This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs.