Search Results for "wireless"

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network adapters that support the 802.11n Wi-Fi standard. ...

Asuswrt-Merlin is a third party firmware for select Asus wireless routers. Based on the Asuswrt firmware developed by Asus, it brings tweaks, new features and other improvements to the original firmware, while retaining its performance and ease of use. Note that only downloads are hosted on SF.net - the complete source code can be found on https://github.com/RMerl/asuswrt-merlin (legacy 380.xx) and https://github.com/RMerl/asuswrt-merlin.ng (382 and newer releases).

Linux driver for the Xbox One wireless dongle. xow is a Linux user mode driver for the Xbox One wireless dongle. It communicates with the dongle via libusb and provides joystick input through the uinput kernel module. The input mapping is based on existing kernel drivers like xpad.

...So, join in, have fun and create your own connected home experience! We've combined the Arduino platform with a small radio transceiver into a fun, flexible world of low cost wireless sensors.

wl500g is ASUS Oleg's based custom firmware. It is free with custom firmware features, and supports the following branches and models: 1.9.2.7-rtn (mainstream, 2.6.22 kernel based, supports: > ASUS RT-N16, RT-N15U, RT-N12, RT-N12B1, RT-N10, RT-N10U, RT-N10UB1, WL-500gP, WL-500gPv2, WL-500W); 1.9.2.7-d (stable/suspended, 2.4.37 kernel based, supports: > ASUS WL-500gP, WL-500gPv2, WL-500W, WL-500gX, WL-520gU, WL-550gE, WL-330gE, WL-320gE, WL-320gP).

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

Using the new C# Dll from swig portability of Openobex/ObexFtp to write a nice GUI able to transfer file between two devices with obex protocol. More Info’s here: http://cs-obexftp.wiki.sourceforge.net/

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

This project is an attempt to port of the ipw2200 driver for the intel2200bg wireless ethernet card from linux and freebsd (iwi) to make it functional under Darwin using the usual I/O Kit method. All help is welcomed and required ;)

WIFI-BOX Firmware for WRT54G(s), Hacked with Linksys's GPL source code, Add more futures for this Wireless Router... Updated: Now support for GS version and Asus WL-500GS...

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.