Search Results for "radio"

ShiftRC is a opensource design for a very cheap, small and simplistic rc driver/rc statemashine. mimics Nikola Tesla's boat it uses a shift chip with multiple outputs and one input for the radio or IR signal. This project is something I wanted to do for a while to make cheap and light weight custom rc chips, and I decided to make it a real project when I found a wooden single use spoon which I wanted to turn into a boat. this project will host multiple version, some very simple ones, and some more complex. a similar thing can be said for the controllers, I will soon upload the schematics and designs for a steampunk style controller. but for a more simple understanding a simple remote might be a transmitter(led, speaker, or antenna for example) a button, and a capacitor to stabilize the button because every pulse you send changes the state. however high precission control is possible. ...

...All of this runs on the MySensors software library for secure communication that has been battle-tested with more than 20 of the leading home automation controllers on the market. So, join in, have fun and create your own connected home experience! We've combined the Arduino platform with a small radio transceiver into a fun, flexible world of low cost wireless sensors.

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

The specifications and information for the 50 most common transistors used in small electronic circuits, robots, and prototyping.

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

This project has moved to github : https://github.com/f4fez/prm80

USB Radio has the goal to develop both the hardware and the software for a USB connected radio. A user should be able to control the radio from the computer and record and save broadcasts to hard drive.

A portable library to control the ICOM PCR-1000 computer controlled general purpose radio receiver and gui front ends for X, Aqua, and windows32