Search Results for "linux networking"

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network...

PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport.

Simple application to get an operating systems detailed specifications. Also does an internet speed test.

wl500g is ASUS Oleg's based custom firmware. It is free with custom firmware features, and supports the following branches and models: 1.9.2.7-rtn (mainstream, 2.6.22 kernel based, supports: > ASUS RT-N16, RT-N15U, RT-N12, RT-N12B1, RT-N10, RT-N10U, RT-N10UB1, WL-500gP, WL-500gPv2, WL-500W); 1.9.2.7-d (stable/suspended, 2.4.37 kernel based, supports: > ASUS WL-500gP, WL-500gPv2, WL-500W, WL-500gX, WL-520gU, WL-550gE, WL-330gE, WL-320gE, WL-320gP).

VTD-XML is the next generation XML parser/indexer/editor/slicer/assembler/xpath-engine that goes beyond DOM, SAX and PULL in performance, memory usage, and ease of use.

This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono http://en.wikipedia.org/wiki/Managed_code If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY...

ar-drone is a Node.js client library for controlling Parrot AR.Drone quadcopters over their network protocol. It provides a high-level API for common flight operations such as takeoff, landing, altitude changes, rotation, directional movement, and hovering. Programs can receive navigation telemetry including flight state, altitude, and other sensor data. Camera output can be accessed as raw video streams or converted into PNG frames through FFmpeg. The library also exposes predefined flight...

I/O performance Analysis Tool

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

A tool for planning, mapping and administration of a network with the ability to place, move and manipulate entities within the network map such as desktops, servers and infrastructure objects. Java 6 is required.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

This project aims to provide a fully functional GUI [and command line] interface to control the "USB LED Message Board v1.0" HW, by dreamcheeky. It allows local and remote multi-user control.

A kernel written by Merck Hung. IA32 architecture, 32-bit protected mode, Memory paging, Keyboard, Timer Interrupt Handling, and a simple kernel shell to operate. Written in C language, development under Linux environment.

Using the new C# Dll from swig portability of Openobex/ObexFtp to write a nice GUI able to transfer file between two devices with obex protocol. More Info’s here: http://cs-obexftp.wiki.sourceforge.net/

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

An web-based application for active network devices record creation and SNMP management of it.

The Host Bus Adapter API (Applications Programming Interface) is a C-level project to manage Fibre Channel Host Bus Adapters.

The SBus is a family of high-speed packet-based databus standards, suitable for both networking and interdevice communication. They are optimized for high data density transactions. This project creates and documents the standards, schematics, and driver

URBI: Universal Robotic Body Interface. URBI is a scripted command language used to control robots (AIBO, pioneer,...). It is a robot-independant API based on a client/server architecture. Liburbi C++/Java/Matlab are available here. Forum available at ht

This program works on command line and helps people to upgrade and recover their D-Link's modems. It's stand-alone and doesn't require web-servers or other stuffs.

Agnix is an educational, network operating system kernel. It is ideal starting point to learn about operating systems. The main goal of the project is to provide a network kernel fully compatible with the Linux Kernel in the system call layer

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.

HericomMesh is a linux distribution for the Linksys WRT54G. This is a replacement firmware for this low cost router. The Hericom Mesh uses a public networking standard AODV, to build the mesh.

Your own portable PC system built by integrating existing Open Source components. This mobile metasystem utilizes the internet's web hosting resources and is accessed via any web browser enabled appliance from your home, work, school, library, cafes, etc.