Search Results for "lcd"

SmartKnob is an open‑source hardware/software hybrid rotary input device featuring software-configurable end-stops and virtual detents, facilitated by a brushless gimbal motor and magnetic encoder—offering programmable haptic feedback and a novel, tactile user interface. 240x240 round LCD ("GC9A01"), protected by 39.5mm watch glass on rotor. BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD. PCB flexure and SMD resistors used as strain gauges for press detection (haptic feedback provided via the motor). USB-C (2.0) connector for 5V power and serial data/programming (CH340). Versatile back plate for mounting - use either 4x screws, or 2x 3M medium Command strips (with cutouts for accessing removal tabs after installation).

...The FPV performance of this suite outperforms all iOS and Android FPV flight applications and supports to both SkyController 2 and SkyController 3 thru USB tethering. If you have several 46' LCD TV units connected to a Mac via HDMI or thunderbolt interfaces. This application is a game changer for you and your colleague to enjoy the most luxurious FPV experience on Parrot drones ever.

An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along with FreeRTOS. ...

...There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc

Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

A device driver in 'C' for interfacing a uController with a Displaytech 64128A LCD display (or its variants).It was written and tested on a Renesas R8C/25 microcontroller proto-board. It provides control, text and graphics functions as function cal

An OS independent implementation of the famous tool for custom LCD control - LCDHype. The program enables for complex and fully customizable screen control through easy to use scripting langauge similar to Pascal.

Stuck pixels are those pixels on an LCD (TFT) screen which get stuck on a certain colour or display wrong colours because a subpixel is stuck as on or off. This program is intended to help in unsticking those pixels by rotating colours.

Library to handle drawing on cheap 84x48 LCD (PCD8544 controller) used in some Nokia mobile phones (for ex. 3310, 3330, 3210) via LPT port. Contains some demostration software. May be used in various applications: pc modding, system monitoring etc.

A solution for Home automation, with HTTP access to manage Tini Board, X10 - I2C - LCD components. You can add your own manager and exchange his services with other. All manager are plug on a kernel (Servlet Java).