Search Results for "kali linux command" - Page 2

An API for manipulating EDIF netlists in Java. We use this API to analyze netlists as a part of our FPGA reliability project. We intend to keep the API as general as possible to support other netlist analysis and manipulation activities. This material is based upon work supported by the National Science Foundation under Grant No. 0801876. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the...

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as...

A Linux tool for the MikroElektronika (www.mikroe.com) AVRprog2 programming hardware. We have migrated to Github! https://github.com/avrprog2/avrprog2-code

A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. This project has now migrated to GitHub. You can find the new repository at https://github.com/dfu-programmer/dfu-programmer

************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** ...

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

C++ Application to Control a Logitech Harmony Hub. See the Readme in the Files section for more information.

tbb is a simple command line interface for FT232R and FT245R Bit Bang Mode. Since version 0.02, I2C host emulation command tbbi2c added. And since version 0.05, you can build the binaries for mac, linux and windows (experimental).

This is a simple CPU burn program for the major UNIX systems: AIX, BSD, HP-UX, Linux, Solaris etc (full list in the source file #defines) and Windows. It will discover the number of available CPU cores and fork enough threads to create a load on all cores by default. The number of threads and memory block size can be changed from the command line.

In-circuit programming (ISP) tool for the NXP (Philips) LPC800/LPC1100/LPC1200/LPC1300/LPC1700/LPC1800/LPC2000/LPC4300 series ARM7/Cortex-M0/Cortex-M0+/Cortex-M3/Cortex-M4 microcontrollers

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

This is a Perl application enabling downloading and configuring the Voltcraft DL-141TH temperature and humidity sensors device. Targeted at Operating Systems supporting libusb. This application exists thanks to reverse engineering.

System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.

FpgaC compiles a subset of the C language to net lists which can be imported into an FPGA vendors tool chains. C provides an excellent alternative to VHDL/Verilog for algorithmic expression of FPGA reconfigurable computing tasks. More info in wiki.

An application that can connect an collect data from vPro machines over network. It uses web-services for communication and works with machines that has AMT version >= 3.0

NedoPC SDK was moved to https://gitlab.com/nedopc/sdk

Porcupine2 is a small wearable sensory unit for logging motion data and doing low-level activity recognition. The project includes electronic schematics for the hardware, software for the microcontroller and client-side software for hardware-interaction.

cobol2j reads or writes COBOL or RPG data files imported from mainframes, AS/400 or Baby/36 environment. Packed decimal, zoned or packed date fields decoding included. EBCDIC conversion. ETL ISAM data to any other platform. PC Cobol ( ASCII ) supported.

The UniLog is a small onboard data logging device for rc models. It records stuff like current, voltage, rpm, height, airspeed... python-unilog is to retrieve the data and do what you want with it.

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

Automate the management of Cisco switches out-of-band (OOB) for extra security and reliability. Uses serial ports; version 2 is thread-safe and supports multiple switches.

This project aims to provide a fully functional GUI [and command line] interface to control the "USB LED Message Board v1.0" HW, by dreamcheeky. It allows local and remote multi-user control.

Applications contributed for URBI (Universal RealTime Behoavior Interface). URBI is a scripted command language used to control robots (AIBO pioneer..) as well as a robot-independant execution and developpement plateform. www.urbiforge.com www.gostai.com

Get and display the traffic counter of a Fritz!Box 7270 (or similar) in a human readable form on local host. The telnet daemon has to be enabled on the FritzBox to download the data file from the AVM router to local host.

XSystem Kernel Project - an object-oriented 32-bit protected-mode operating system for IA32-architecture.