Search Results for "virtual wireless device"

...Consumed with a public interface that's similar to other Arduino standard libraries. OSI Network Layer for multi-device communication. Create a home sensor network.

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network adapters that support the 802.11n Wi-Fi standard. ...

Documentation, examples, and reference driver code for the VMware virtual graphics device used by all VMware virtual machines. This project provides the information and code necessary to write both 2D and 3D graphics drivers for this device.

SmartKnob is an open‑source hardware/software hybrid rotary input device featuring software-configurable end-stops and virtual detents, facilitated by a brushless gimbal motor and magnetic encoder—offering programmable haptic feedback and a novel, tactile user interface. 240x240 round LCD ("GC9A01"), protected by 39.5mm watch glass on rotor. BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD.

...A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. Because these management packets are unencrypted, you just need the MAC to address of the Wi-Fi router and of the client device which you want to disconnect from the network. You don’t need to be in the network or know the password, it’s enough to be in its range. With the 802.11w-2009 updated standards, management frames are encrypted by default.

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

A Linux Alsa MIDI device driver for the Mixman dm2(TM) virtual turntable device.

Goal is to develop a client program for Linux to connect to a "Wireless USB hub" over Ethernet. Main focus in first stage is to connect to a device produced and sold by Medion (MD-86097).

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

This project demonstrates FAT12 file system as interface to control LPC2148 with FreeRTOS. Control interface is exposed via USB mass storage device with virtual FAT12 file system and using files read/write access to provide control interface to HW.

This project provides a linux kernel module driver for the Velleman K8055 USB Experiment Interface Board. It creates and gives you access to /dev/k8055 virtual device file. You can communicate with the driver via ioctl() from c programs. Happy hacking!

ULLA allows developers of network aware applications to access data from device drivers similar to the Wireless Extensions on Linux. However, its new design simplifies the API syntax and expands the access to all wireless technologies such as GSM, BT.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

V4L2 Virtual Device is a driver providing one or multiple video pipes. It is used to route the output of a user space video source application to typical video “consuming” applications (players, encoders, PVRs) that are compatible with v4l2 devices.

TiVo USB Wireless Adapter device driver for Linux and Windows. The adapter users the Broadcom BCM4320 (AirForce One. Single-Chip 802.11g USB 2.0 Transceiver) chipset and portions of this project may be directly applicable to other devices using the same.

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

Zydas 1201 based wireless adapters Linux driver. As Sweex is not longer supporting Linux for this device, but they did in the past using MPL and GPL licenses, we have posted the original and evolved driver.

eXtendBus is a device sharing mechanism for Virtualization Platform, specially designed for Xen hypervisor. eXtendBus attempts to modify Xen’s architectural features and combine it with extended device driver architecture.