Search Results for "virtual parallel port"

The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA.

...Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").

WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

A collection of libraries and tools to use graphical LC displays connected to the PC's parallel port.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

libieee1284 is a cross-platform library for parallel port access.

This C++ and Qt based project provides an easy way to control the step motor boards PAO-3M and SMK-4M-4A from Grummes Elektronik GmbH from within your own application. Interfacing is done using the LPT parallel port.

Software for controlling vending machines. Allows users to preload credits to their user accounts and use them to buy various goods from one or more vending machines connected to computer via parallel port relay interface.

hardware log monitor that will display log behaviour via various hardware (parallel port, USB devices, ...). You can specify pattern(regexp) in log(s) on which hardware will turn on. It has also some unique ways of visualization of log files.

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

Parapin makes it easy to write code under Linux that controls individual pins on a PC parallel port. This kind of control is very useful for electronics projects that use the parallel port as a generic digital I/O interface (instead of as a printer port)

Uma API de C++ multi-plataforma que fornece fácil acesso à porta paralela. Com ela o desenvolvedor não se preocupa com inversões de bits e como o sistema lida com a porta. English: A C++ API for using the PC parallel port written in BR Portuguese

This is an easy to use library for interfacing with the parallel port from Java.

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

Cylon is a project to send various patterns to a simple LED display connected to the parallel port of a standard PC. The low-level drivers currently support Linux, but I have ported it to FreeBSD and Cygwin.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

geniusvp2 is a SANE (http://www.sane-project.org/) backend for the GeniusŽ ColorPage-Vivid Pro II flatbed scanner. Currently, only the parallel port version is supported.

FIPP 4L is to provide a linux kernel driver and C library, which allow programming the Fischertechnik (R) parallel port interface (product ID 30520) in an easy way.

A linux client/server based LCD Driver for HD44780 compatible Display controllers connected to the parallel printer port.

A nice tool for low-level managing of the parallel port and for experimenting with it. It uses GTK+ 2 for the GUI and runs on Linux and Windows (with mingw32).

Simple GTK2 application allowing users to manually toggle devices attached to a parallel port device on or off (through the D0->D8 data lines), or run an automatic sequence based on a simple language contained in this program. Good for driving relays, etc

Eppnics: Electronic parallel port network interfaced control system. Eppnics allows you to control electronic circuits connected to a parallel port via a TCP/IP connection.