Search Results for "test hardware"
Sort By:
Showing 56 open source projects for "test hardware"
View related business solutions-
Earn up to 16% annual interest with Nexo.Generate interest, access liquidity without selling, and execute trades seamlessly. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
1
RIDE
Test data editor for Robot Framework
RIDE is a development environment for Robot Framework test cases. Robot Framework is a generic test automation framework for acceptance testing and acceptance test-driven development. -
2
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards.... -
3
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's... -
4
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 315,606+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2026. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ... -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
5
LinuxHardware Info
Hardware Info for Linux portable AppImage + Benchmark
LinuxHardware Info (portable/AppImage) -------------------------------------- Ihr wollt wissen was in Eurem Rechner steckt? Genau das könnt Ihr mit LinuxHardwareInfo, ohne jedes mal die Konsole zu bemühen. Kurz-Info: - Hardware Analyse - einfache Benchmarks (CPU / Grafik/RAM und HDD) - HDD/USB Fake Erkennung - Live Sensoren - Portable AppImage (einfach vom USB-Stick in Live-Image kopieren) - automatische Update Erkennung ab v1.2 - Darkmode - und anderes - im Support-Forum gibt... -
6
This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.
-
7
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
8
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple... -
9
VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.
-
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
10
Operating System Information Checker
Simple app to get OS detailed specs and test internet speed.
Simple application to get an operating systems detailed specifications. Also does an internet speed test. -
11
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus... -
12
stm32f7nucleo-eastrising-7inch-lcd-spi
STM32 Nucleo STM32F746ZG interface to East Rising 7 inch LCD Panel
An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along... -
13
DIY Arduino Boards IO I2C
DIY Arduino Boards for IO using port expanders and I2C
DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code -
14
sdtest
Test integrity of SD cards
-
15
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
-
16
liblabpro
Open-source access to Vernier LabPro devices
liblabpro is a cross-platform C library for controlling and collecting data from Vernier LabPro devices. It is currently in an early work-in-progress stage and is not affiliated with Vernier in any way. As a test case, it also includes a basic program, labpro-console, for communicating with a LabPro using its plaintext command system. -
17
Arduino Si4735 radio library
Arduino and Silicon Laboratories Si4735 radio library
...Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features. -
18
Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.
-
19
CANopen for LabVIEW
LabVIEW CANopen client library
A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode. -
20
can4linux
CAN bus device driver
can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO -
21
pyhard2, control hardware from python
An object-oriented framework for the development of instrument drivers
pyhard2 is an object-oriented framework to help in the development of instrument drivers. pyhard2 is proposed as an alternative to LabVIEW. Emphasis is given on serial drivers but the framework can be used with any socket. The source also contains the implementation of a PID controller and a setpoint ramp generator. The instrument drivers may further be incorporated in a GUI, using, e.g. PyQt or PySide. Threading is automatically taken care of. Furthermore, generic GUI (called... -
22
MatlabSimulink2CPP
Demo of Simulink to C++ C or HDL FGA for HFT potential
Video and files download for Visual trading idea to C++ or FPGA HFT Meetup File download sample: test model (Matlab 2014b with Visual Studio 2013 C++ project generated) Powerpoint MATLAB SIMULINK http://quantlabs.net/blog/2015/04/video-and-files-download-for-visual-trading-idea-to-c-or-fpga-hft-meetup/ -
23
GRBL for RAMPS 1.4
GRBL port for RAMPS .1
************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** ... -
24
This is a simple CPU burn program for the major UNIX systems: AIX, BSD, HP-UX, Linux, Solaris etc (full list in the source file #defines) and Windows. It will discover the number of available CPU cores and fork enough threads to create a load on all cores by default. The number of threads and memory block size can be changed from the command line.
-
25
Schlangenaufbewahrungsbehälter
A Deliberately Non-Object-Oriented Python Interface to COMEDI
aka: Schlang - A Deliberately Non-Object-Oriented Python Interface to COMEDI COMEDI datatypes and functions are replicated though this interface using the Python ctypes library. This allows the user to interface directly with comedi-lib though the comfortable interface of a Python interpreter.Object-Orientation of the interface is deliberately not provided so the coding style will loosely mimic C -- in this way, Schlang can be used to prototype and debug complex programs that will later...
