Search Results for "serial port plotter"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full support for building desktop applications is planned for future development. Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is a Long-Term Support version).

...For the latest source, releases, bug tracking, use https://github.com/OpenCBM/OpenCBM instead! Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").

MisterHouse is a Windows/Unix home automation program written in Perl. It can respond to voice commands, web browsers, time of day, serial port and X10 data, external files, etc and can speak via Text to Speech engines. Support is on https://sourceforge.net/p/misterhouse/mailman/misterhouse-users/ and code is maintained on https://github.com/hollie/misterhouse

The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA.

WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.

5dpo Component Library for Lazarus (Sdpo) provides a comport (serial port) component, an UVC video driver component for webcams, a Gtk fast painting form and a Joystick component.

The program ttylog is a serial port logger which can be used to print everything that comes in to a serial device to stdout. The device and the baud rate can be specified on the command line and a timeout can be set instead of just killing the process in order to stop it. You can also elect to have the output being sent to standard out to be time stamped.

...The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

This project has been moved to GitHub. See: https://github.com/crayzeewulf/libserial/

Serial Wire Debug (SWD) Open Library for low level Debug Access Port (DAP) on new ARM Cortex CPU devices. PROJECT HAS MOVED TO https://GitHub.com/CeDeROM/LibSWD PLEASE UPDATE YOUR LINKS! :-)

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

This is a project of an open source library that makes possible to command I/O ports such as LPT or Serial port from any OS by the same functions. It includes also some portable time functions (delay_us(microseconds); delay_ms(milliseconds);)

An OpenSource software (ApaciLinux) that allows to run a PHP Server to control a device connected through the serial port

Serial line sniffer (slsnif). slsnif is a serial port logging utility. It listens to the specified serial port and logs all data going through this port in both directions.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

There are different files supplied. One program for webcam controlling inline with the orginal idé. And different help classes if you would like to do something yourself. Also a general package of classes to communicate with the RS232 port.

Columbo Simple Serial Library is an easy to use, event driven serial port communication library for Linux.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.

Programmer for Atmel AVR microcontrolers that uses PC parallel port to program the device in serial mode. The device can be programmed "in-system". Comes with a schematic of the hardware required. Hardware designed to be simple, efficient and unexpensive.

DeSlot is an open source slot car timing system. It utilizes phototransistors soldered onto a hacked up parallel printer cable, a joystick port or serial port. Planned features include support for up to 4 Lanes, 4 drivers, lane rotation, Formula One sty

setserial is a program designed to set and/or report the configuration information associated with a serial port.