Search Results for "eeprom"

The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to...

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries...

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

A multi-platform GUI that allows you to inspect and modify the EEPROM of the FT232 line from FTDI. Also lets you send and receive data using all the bit bang modes.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

Strokey is a small hardware keyboard logger saving all keystrokes into an EEPROM memory for later investigation. The device may get attached to any PS/2-keyboard by intercepting the cable, or get placed directly inside for maximum invisibility.

EERPOM programming software for FTDI USB<=>Serial convertors configuration EEPROM. Can read/write/erase eeprom with ftdi convertor, save/load configuration file

Mprog is a tool designed for programming microcontroller. At the moment it supports only Atmel AVR microcontroller It support read / write programm flash / eeprom. To file firmat are supported: binary & Intel hex.

An universal programmer for EPROM/EEPROM/FLASH chips (27Cxx/28Fxx/29Fxx), Microchip PIC and Atmel Microcontrollers, Serial EEPROM (24Cxx,93Cxx,25xx,others), JTAG interface, and other devices. Configurable to support virtualy any device.

Java control app for X10 CM11A/CM17A. Includes X10Server server-side app for Win, Linux, & Dallas Semi TINI. Support EEPROM /c dynamic reloadable time-of-day macros. Simple access protocol. Perl client & Java AWT X10Client for Sharp Zaurus, Win, & Linux.