Search Results for "clock"
Sort By:
Showing 18 open source projects for "clock"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Earn up to 16% annual interest with Nexo.Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
-
1
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
...Reads SNES roms and reads/writes save games from and to the SNES cartridge. Supported cartridge types so far, LoRom, HiRom, ExHiRom, DSP, SuperFX, SuperFX2, SDD1, CX4, SPC7110, SA1 (last two chips need Adafruit Clock Generator). Reads and writes SNES Satellaview 8M Memory packs (BS-X cartridge and Adafruit Clock Generator needed). Reads and writes Nintendo Power Super Famicom Memory Flash Cartridges (needs Adafruit Clock Generator for best result). -
2
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
...If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE, install libraries 561, 562, and 563 with "platformio lib install", adapt the WeatherStationDemo.ino file to your needs. The simple class uses the header date and time to set the clock. NTP-based time class written by Fabrice Weinberg. We fixed many bugs and improved performance and changed the API a little bit. Either compare your code to the updated WeatherStationDemo or read through the upgrade guide. -
3
almLib
EPICS High Resolution Timer and Alarm Clock Library.
An EPICS high resolution timer and alarm clock library for Linux and RTEMS. EPICS is the Experimental Physics Industrial Control System framework. This library supports Linux by utilizing POSIX functions. For RTEMS VME-Bus systems it supports the CPU cards mvme2100, mvme5500 and mvme6500 ("beatnik" board support). -
4
TuxClocker
Qt overclocking tool for GNU/Linux
...The project combines a DBus daemon with a Qt graphical user interface, allowing users to inspect and adjust performance characteristics of their hardware—particularly GPUs—under Linux. TuxClocker provides a user-friendly GUI atop lower-level interfaces, making it easier to control clock speeds, fan behavior, and other tuning parameters without resorting exclusively to command-line tools. It is especially useful for Linux enthusiasts and power users looking to optimize performance for gaming, content creation, or benchmarking. The project also has a companion command-line version (tuxclocker-cli), broadening usability scenarios for scripting or headless setups. ... -
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
5
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. ... -
6
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus... -
7
Cpuspeedy is simple and easy to use program which allows you to change the clock speed and voltage of the CPUs on the fly, using the Linux's CPUFreq driver. Use it and you should save battery consumption and reduce the temperature of your laptop.
-
8
SmGen
Verilog Finite State Machine (FSM) Code Generator
SmGen is a finite state machine (FSM) generator for Verilog. On the other hand, it is not an FSM entry tool. The input is behavioral Verilog with clock boundaries specifically set by the designer. SmGen unrolls this behavioral code and generates an FSM from it in synthesizable Verilog. Clock boundaries are explicitly provided by the designer so there is good control on the expected timing -
9
LBSP
Real-Time Processing Library for OSHW Biomedical Sensors
...We propose a novel software architecture based on open-software hardware platforms which allows programmers to create data streams from input channels and easily implement filters and frequency analysis objects. The performances of the different classes given in the size of memory allocated and execution time (number of clock cycles) were analyzed in the low-cost platform Arduino-Genuino. This library is free to use for research. Please cite above publication. -
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
10
ht3klcd
Bash script to control 15c2:ffdc SoundGraph panel.
...The device is identified as ID 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller. However, the LCD panel is different from the others I have seen around in the internet. It has: - 12 text characters for messages and the clock; - 3 fan indicators (updated automatically); - a temperature indicator (updated automatically); - a CPU usage bar; - another bar in the left I couldn't get to work (volume?). LCDd does keep the panel on, but it can't update any info, and the clock just keeps frozen at 12:00. I've tried both the imon and the imonlcd drivers, same results. ... -
11
iwattnick
iWattnick: the ultimate e-bike computer
...It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?... -
12
XFreq
a UNIX GUI to monitor Core i7 & Core 2 processors
XFreq provides a GUI to monitor the Processor frequencies (including Turbo Boost), the temperatures, C-States; and to alter the operational features of the Intel Core i7 processor. XFreq is also programmed for Core 2 and other Intel 64-bits architectures. -
13
Linux FSB overclocking tool
Linux FSB overclocking tool
Linux utility to change the base clock (FSB/Front Side Bus) frequency on the fly. -
14
Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.
-
15
...The screens are optimized for 20x4 alphanumeric LCD and Logitech G15 LCD. It can show CPU stats, memory stats network stats, Amarok/Audacious/Exaile track info, uptime , date, clock, disk space usage and emesene information.
-
16
This Java program calculates the SPBRG value for a given baud rate (Baudrate) and clock frequency. It comes with a graphical interface and a simple value interpretation guide. A Java Webstart file (.jnlp) is provided.
-
17
KOnAir is a KDE application designed to handle radio cards, using the V4L API. It implements a traditional KDE look and feel interface as in Kscd or KMP3. It will also provide cool features like a Spectrum Analyser, an alarm clock and a snooze function.
-
18
Picode is the ultimate VHDL picode 16 to 32 bits controller. It is described in only one entity and is implementable in standard FPGAs. It has it own compiler. Picode is designed to take only one or two clock cycle duration per instruction.
- Previous
- You're on page 1
- Next
